Hei !
You are employee, researcher, PhD, PostDoc or Master student at the department of material science and engineering at NTNU and you are working in process metallurgy lab, then you should have a look at the presentation linked under.
You will find all the information about the technical support and equipment in process metallurgy at the department and also some basic info about running experiments in our lab. In the table under there are also links to more detailed info about our equipment.
Technical support at IMT and equipment in Process Metallurgy - wiki.pdf
Regards.
Type of equipment | Equipment name | Location | Contact person | Link to more information |
---|---|---|---|---|
graphite tube furnace | TF2 - translation | E-214 | Delphine Leroy | Graphite tube furnace - TF2 translation - E214 |
graphite tube furnace with weighing device | TF1 - termovekt | E-214 | Delphine Leroy | Graphite tube furnace - TF1 thermovekt - E214 |
graphite tube furnace | TF3 | E-118 | Delphine Leroy | Graphite tube furnace - TF3 - E-118 |
graphite tube furnace with off gas analysis | ReSiNa ovn | E-214 | Delphine Leroy | Graphite tube furnace - ReSiNa furnace - E-214 |
vertical retort TGA furnace with off gas analysis | DISvaDRI ovn | E-214 | Edith Thomassen (SINTEF) | DISvaDRI furnace - E214 |
horizontal alumina tube furnace | annealing ovn | E-118 | Delphine Leroy | Alumina tube furnace - annealing furnace - E118 |
sessile drop furnace | wettability furnace | E-208 | Tone Anzjon (SINTEF) | Wettability furnace - E208 |
induction furnace | Blå ovn | K-013 | Delphine Leroy | Induction furnace - Blue furnace - K013 |
gas humidification system | Fuel Cell technologies | K-013 | Delphine Leroy | |
induction furnace | IF75 | M-118 | Delphine Leroy | Induction furnace - IF75 - M-118 |
induction furnace | Cold Crucible | K-020 | Delphine Leroy | Induction furnace - Cold crucible - K-020 |
silicon vertical gradient freeze | VGF - 1kg | M-130A Sollaben | Antoine Autruffe | Silicon vertical gradient freeze - VGF - 1kg - Sollaben |
ferroalloy and silicon pilot furnace | Pilot furnace | Smelting hall | Karen Sende Osen (SINTEF) | Ferroalloy and silicon Pilot furnace unit - Smelting hall |
Electrical conductivity measurement | M-116 | Bendik Sægrov (SINTEF) | ||
3 resistance furnaces (5 l and 1000°C) | Nabertherm | E-K007 | Pål Skaret | Casting furnaces |
vertical alumina tube furnace with off-gass analysis and mass spectrometer | ENTECH 1800 / ETF65 | E-118 | Ove Darell (SINTEF) | |
induction heated, rapid solidification | small melt spinner | A-K047 | Delphine Leroy | |
induction heated, rapid solidification | medium melt spinner | E-K020 | Kristian Skorpen | |
Rheometer | E-K007 | Lars Arnberg | ||
Analysis of metal quality | Podfa filter | E-K007 | Lars Arnberg |