How to use the booking system ("BookitLab") for DaVinci2/A-unit/Simens D5000
Log on to bookitlab (https://core.bookitlab.com/ntnu/) using your NTNU feide user account and go to home. If you do not have a feide account, please contanct the lab responsible.
First: Make sure you have added the IMA – XRD-lab in your filter at the top right corner of the screen.
Click on Instruments and then Timeline in the menu to the left.
Find the DaVinci2/A-unit/Simens D5000 instrument in the list and click somewhere on the timeline
Fill in the New Reservation form using the following steps:
- Start and end time of the reservation. The end time should be after your measurements are done.
- Change the user and project name is the auto filled data is not correct.
- You can add any remarks for the engineer in the remarks box (Voluntary)
- When you are done click create reservation.
Note: If you press the calculate credit button it will show how much the reservation will cost.
IMPORTANT: The first time you book the instrument the status will be pending, as the engineer need to check that you have had the correct training. You cannot use the instrument until the status have been changes to Approved.
It you get an error message saying that you are missing the prerequisite New user training – XRD please contact the lab responsible and we will add you to the list.
NOTES for DaVinci2:
The standard set-up for DaVinci2 is the transmission capillary mode with a Molybdenum source.
If you want the lab responsible to prepare a different set-up for you please fill in the service request "Apply for Advanced setup in DaVinci2" in the Booking system: https://core.bookitlab.com/ntnu/ServiceRequests.aspx
How to put in a servise request:
Go to Request services and then Requests. Click the plus sign and then choose Apply for Advanced setup in DaVinci2.
You also need to select yourself as the user and add a project number.
Fill in the form:
TODO: Add a picture and description