...
| Test | Slice | Time | Settings | Status | Comment | Image slice | Image samples | Start temp | End temp | Video | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 6 | 1:11:18 | Passes: 4 x 1mm Power: 100% Speed: 0.1 - 1.0 mm/s Samples: 2 x 10 | Success | Spindle had trouble starting. Pausing the program and giving it a push helped, as the spindle doesn't turn off when pausing the program. Passes: 1 more than necessary. Collection:
Samples hitting sample tube:
Speed comments:
Collector did not rotate after reaching position 2. |
|
| -15 -9 | -16 -14 |
| ||||||||||||||||||||||||||||||||||||
| 2 | 7 | 22:14 | Passes: 4 x 1mm Power: 100% Speed: 1.1 - 2.0 mm/s Samples: 2 x 10 | Success | Spindle had trouble starting. Pausing the program and giving it a push helped, as the spindle doesn't turn off when pausing the program. Passes: 1 more than necessary. Collection:
Samples hitting sample tube:
Analyse the video and comment on each of the speeds Speed comments:
|
|
| -16 -14 Can be wrong, temperature readings froze | -16 -14 Can be wrong, temperature readings froze |
| ||||||||||||||||||||||||||||||||||||
| 3 | 8 | 2:07 | Passes: 4 x 1mm Power: 100% Speed: 2.1 - 3.0 mm/s Samples: 2 x 10 Startheight: 69 (everyone above has 69) | Failed | Mill bit snapped at first sample at 2.2 mm/s Collection:
Samples hitting sample tube:
Speed comments: Analyse video and fill out
Can have snapped due to slice being slightly warm | -12 -10 | -12 -10 |
| ||||||||||||||||||||||||||||||||||||||
| 4 | 8 | 17:49 | Passes: 4 x 1mm Power: 100% Speed: 2.0 mm/s Samples: 2 x 10 Startheight: 68 | Success |
Collection:
Samples hitting sample tube:
Analyse the video and comment on each of the speeds Speed comments: |
|
| -14 -13 | -14 -13 |
| ||||||||||||||||||||||||||||||||||||
Frys stod på over natten. Ingen frost på x-ledeskrue
|
