Strength testing
| Test | Slice | Time | Settings | Status | Comment | Image slice | Image samples | Start temp | End temp | Video | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 1 | 5:00:38 | Passes: 24 x 0.25mm Power: 100% Speed: 0.2 - 1.4 mm/s Samples: 3 x 6 Startheight: 68 Offset: -5 | Success | Collection:
No clear visiual utlier in terms of cut quality |
|   
| -10 -7 | -16 -14 | |||||
| 2 | 2 | 3:29:19 | Passes: 32 x 0.25mm Power: 100% Speed: 1,5 - 2,6 mm/s Samples: 3 x 12 Startheight: 66 Offset: -5 | Success | Changed milling area to 32 passes due to slice being uneven cut. Collection:
No clear visiual utlier in terms of cut quality |
|  
| -11 -6 | ||||||
| 3 | 3 | 2:29:10 | Passes: 32 x 0.25mm Power: 100% Speed: 2,7 - 3,9 mm/s Samples: 3 x 13 Startheight: 66 Offset: -5
| Success | Collection:
No clear visiual utlier in terms of cut quality |
|  
| -16 -13 | -17 -14 | |||||
| 4 | 4 | 1:57:46 | Passes: 32 x 0.25mm Power: 100% Speed: 4,0 - 5,2 mm/s Samples: 3 x 13 Startheight: 66 Offset: -5
| Failed | Mill bit broke on first sample of 4,6mm/s Collection:
|
| 
| -9 -8 | ||||||
| 5 | 5 | 2:14:02 | Passes: 32 x 0.25mm Power: 100% Speed: 4,3 mm/s Samples: 45 Startheight: 66 Offset: -5
| Failed | Mill bit broke on sample 32. Slice loosened slightly from the plate, making the first pass too deep. Collection:
|
| 
| -13 -6 |
Confirmatory testing
| Test | Slice | Time | Settings | Status | Comment | Image slice | Image samples | Start temp | End temp | Video | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6 | 6 | 24:17 | Passes: 32 x 0.25mm Power: 100% Speed: 4,3 mm/s Samples: 6 Startheight: 66 Offset: -5 | Success | Collection:
Samples hitting sample tube:
|
| 
| -8 -2 | -9 -6 | ||||||||||||||||||||||||||
| 7 | 7 | 08:53 | Passes: 32 x 0.25mm Power: 100% Speed: 4,3 mm/s Samples: 6 Startheight: 66 Offset: -5 | Failed | Collection:
Very unsure about what made the spindle break |
|
| -23 -20 | -21 -20 | ||||||||||||||||||||||||||
| 8 | 8 | 24:01 | Passes: 32 x 0.25mm Power: 100% Speed: 4,3 mm/s Samples: 6 Startheight: 66 Offset: -5 | Success | Collection:
Samples hitting sample tube:
|
|
| -10 -3 | -12 -9 | ||||||||||||||||||||||||||
| 9 | 9 | 24:17 | Passes: 32 x 0.25mm Power: 100% Speed: 4,3 mm/s Samples: 6 Startheight: 66 Offset: -5 | Success | Collection:
Samples hitting sample tube:
First sample flew up, being in the way of other samples. Other samples were able to be cut either way, but this has happened before, and should thus be considered in an end-product. |
|
| -7 -3 | -8 -5 | ||||||||||||||||||||||||||
| 10 | 10 | 24:17 | Passes: 32 x 0.25mm Power: 100% Speed: 4,3 mm/s Samples: 6 Startheight: 66 Offset: -5 | Success | Collection:
Samples hitting sample tube:
|
|   | -9 -6 | -10 -6 | ||||||||||||||||||||||||||
| 11 | 11 | 24:18 | Passes: 32 x 0.25mm Power: 100% Speed: 4,3 mm/s Samples: 6 Startheight: 66 Offset: -5 | Success | Collection:
Samples hitting sample tube:
|
|
| -12 -10 | -12 -10 | ||||||||||||||||||||||||||
| 12 | 12 | 24:17 | Passes: 32 x 0.25mm Power: 100% Speed: 4,3 mm/s Samples: 6 Startheight: 66 Offset: -5 | Success | Collection:
Samples hitting sample tube:
|
|     | -9 -3 | -10 -7 | ||||||||||||||||||||||||||
| 13 | 13 | 24:18 | Passes: 32 x 0.25mm Power: 100% Speed: 4,3 mm/s Samples: 6 Startheight: 66 Offset: -5 | Success | Collection:
Samples hitting sample tube:
| -8 -3 | -9 -6 | ||||||||||||||||||||||||||||
| 14 | 14 | 24:17 | Passes: 32 x 0.25mm Power: 100% Speed: 4,3 mm/s Samples: 6 Startheight: 66 Offset: -5 | Success | Collection:
Samples hitting sample tube:
| -7 -4 | -9 -6 | ||||||||||||||||||||||||||||
| 15 | 15 | Passes: 32 x 0.25mm Power: 100% Speed: 4,3 mm/s Samples: 6 Startheight: 66 Offset: -5 | Success | Collection:
Samples hitting sample tube:
| -7 -4 | -8 -6 |
