...
Slice 10: Success
Image Removed
Image Removed
| Deck of Cards |
|---|
|
Speed: 1mm/s Power: 100% Layer height: 0.50 The first sample did not fall down. Had to change mill bit to Ø1.0mm Lower starting position height Slice loosened No image Pushing with spindle activated. Several pushes on difficult geometry Pushing is not perfect, because it is unpredictable where the slices will become stuck. | Card |
|---|
| id | 1 |
|---|
| label | Testing on turkey slices |
|---|
| title | Testing on turkey slices |
|---|
| Testing on Turkey Slices: Del 2To define the effectiveness of the CNC and discover possible faults, we test ARTS 2.0 on turkey slices.
The setup has now been upgraded, and therefore no longer needs post-processing of the gcode. Summary | | Slice | Settings | Status | Comments | Future change |
|---|
| 1 | Success | The last sample did not fall down | | 2 | Speed: 1mm/s Power: 100% Layer height: 0.50 | Success | The last sample did not fall down | Increase layer height for bigger last cut | | 3 | Speed: 0.6mm/s Power: 100% Layer height: 0.75 Mill bit diameter: 1.0 mm | Success | Lower starting position height | 4 | Speed: 0.6mm/s Power: 100% Layer height: 0.75 Mill bit diameter: 1.0 mm | Success | The first sample did not fall down. | | 5 | Speed: 0.6mm/s Power: 100% Layer height: 0.75 Mill bit diameter: 1.0 mm | Success | Two samples did not fall | Added drop-off after each sample in the code. | | 6 | Speed: 0.6mm/s Power: 100% Layer height: 0.75 Mill bit diameter: 1.0 mm | Failure | 7 | Speed: 0.6mm/s Power: 100% Layer height: 0.75 Mill bit diameter: 1.0 mm | Failure | Slice loosened | 8 | Speed: 0.6mm/s Power: 100% Layer height: 0.75 Mill bit diameter: 1.0 mm | Success | 9 | Speed: 0.6mm/s Power: 100% Layer height: 0.75 Mill bit diameter: 1.0 mm | Success | Filmed | | 10 | Speed: 0.15mm/s Power: 100% Layer height: Full Mill bit diameter: 1.0 mm | Success | First and third sample did not fall out | Automatically push out samples, instead of circkeling g above them | | 11 | Speed: 0.15mm/s Power: 100% Layer height: Full Mill bit diameter: 1.0 mm | Failed | Spindle was not activated after pushing. | 12 | Speed: 0.15mm/s Power: 100% Layer height: Full Mill bit diameter: 1.0 mm | Success |
Slice 12: Success Image Removed Image Removed
Slice 11: Failed Image Removed
| Deck of Cards |
|---|
| | Card |
|---|
| | Card |
|---|
| | Card |
|---|
| | Card |
|---|
| | Card |
|---|
| | Card |
|---|
| | Card |
|---|
| | Card |
|---|
| | Card |
|---|
| | Card |
|---|
| | Card |
|---|
|
| Widget Connector |
|---|
| url | http://youtube.com/watch?v=3fcTJdIPX2k |
|---|
|
|
| Card |
|---|
|
| Widget Connector |
|---|
| url | http://youtube.com/watch?v=U1vKUnVJOm8 |
|---|
|
| Card |
|---|
|
Slice 9: Success Image Removed Image Removed
|
Cardid8label8titleSlice 8Slice 8: Success
Image Removed
Card7labeltitleSlice 7Slice 7: Failure
Image Removed
| Widget Connector |
|---|
| url | http://youtube.com/watch?v=TfZ7Z49obKw |
|---|
|
CardSlice 6: Success
Image Removed
Image Removed
Image Removed
CardSlice 5: Success
Image Removed
Image Removed
Image Removed
Image Removed
Image Removed
Image Removed
CardSlice 3: Success
Temperature data found in: arduino_data_log - Copy 150420241409
Image Removed
Image Removed
Image Removed
Image Removed
Image Removed
Slice 2: Success
Temperature data found in: arduino_data_log - Copy 140420241921
Image Removed
Image Removed
Image Removed
Image Removed
Image Removed
: SuccessFirst test slice with new setup.
Temperature data found in: arduino_data_log - Copy 130420241814
Image Removed
Image Removed
Image Removed
Image Removed
Image Removed
Image Removed
Image Removed
| Card |
|---|
| id | 1 |
|---|
| label | Testing on turkey slices |
|---|
| title | Testing on turkey slices |
|---|
|
|
...