You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

WAGO MQTT Setup

Setting up a WAGO PFC200 PLC requires some configuration.

  1. Open the PLC's web server by entering its IP in a web browser and log in.
  2. Press "Configuration" in the menu bar.
  3. In the left menu, press "Cloud Connectivity".
  4. Press "Connection 1".
  5. Check Enabled.
  6. Set "Cloud Platform" to "MQTT AnyCloud".
  7. Set "Hostname" to the CDPStudio MQTTBroker's IP Address
  8. Set "Port Number" to the chosen port (1884).
  9. Set "Client ID" to a recognizable name such as "Wago".
  10. Set "Data Protocol" to "Native MQTT".
  11. Press "Submit".
  12. Press "Reboot" in the top right corner

The Wago is now configured to send MQTT data to the broker correctly.

  • No labels

Industrielle styresystemer - NTNU Ålesund - Automasjon