Industrielle styresystemer - Wiki
The function block PUMP is the control for a pump. By using the override function, you can set it to manually start or stop the pump. If it is in auto, the input decides if it is open or closed. From the function block, we get the status of the pump. So, if it is manually overridden open or closed, or if it is auto on or off. If motion is activated then the pump will open if it is in auto.
Override pump
Override Value | Description |
---|---|
0 | Auto |
1 | Manual On |
2 | Manual Off |
Pump states
Override Alarm Value | Description |
---|---|
0 | Auto Off |
1 | Auto On |
2 | Manual On |
3 | Manual Off |
With everything explained the Inputs and Outputs are the following,