Versions Compared

Old Version 5

changes.mady.by.user Unknown User (augustmk)

Saved on

compared with

New Version 6

changes.mady.by.user Unknown User (augustmk)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
  1. The kill switch (big red button) has to be raised before the motors can receive power.
  2. Turn the Pioneer LX robot base ON. Ignore the small screen on the robot base.
  3. Wait for the menu to appear on the start box.
  4. Use the two buttons on the left to select the correct start sequence.
  5. Press the right button to select.

There are 2 possible modes to run:

  1. ariaServer: allows for manual operation using the joystick
  2. StateMachine

The 'sequence X' lines are nothing.

The startup box must be connected to one of the Pioneer’s USB ports. The startup box is powered and communicates over USB. In the Normal Start mode, the Cyborg expects to start on the footprints in Glassgrden, facing down the hall (figure to come).

...