Libraries

Shaketune

https://github.com/Frix-x/klippain-shaketune

wget -O - https://raw.githubusercontent.com/Frix-x/klippain-shaketune/main/install.sh | bash

Append the following to your printer.cfg file:

[include K-ShakeTune/*.cfg]

append to end of moonraker.conf

[update_manager Klippain-ShakeTune]
type: git_repo
path: ~/klippain_shaketune
channel: beta
origin: https://github.com/Frix-x/klippain-shaketune.git
primary_branch: main
managed_services: klipper
install_script: install.sh

MobileRaker

https://github.com/Clon1998/mobileraker_companion

1. Open a terminal or establish an SSH connection on the host running Klipper.
2. Change the directory to your home directory by running the following command:

cd ~/

1. Clone the Companion repository by executing the following command:

git clone https://github.com/Clon1998/mobileraker_companion.git

1. Navigate to the mobileraker_companion directory:

cd mobileraker_companion

1. Run the installation script to set up the Companion:

./scripts/install-mobileraker-companion.sh

Quick install

cd ~/
git clone https://github.com/Clon1998/mobileraker_companion.git
cd mobileraker_companion
./scripts/install-mobileraker-companion.sh

KAMP - Klipper Adaptive Mesh Probing

makes the printer only probe the bed at the local area where the print is preformed

https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging

too much information for installguide here. Check repo for guide and config installs

Config files

Crowsnest reinstall

https://crowsnest.mainsail.xyz/faq/upgrade-from-v3-to-v4

needed for webcam as the prebuild version is broken

place files in home/manulab/printer_data/config

fresh-config-backup.zip

Creality board pins