Old DC to DC converter box covered in epoxy was likely fried on last test of the bachelor thesis.
Wires
| Color | Voltage | Component | Confirmed |
|---|---|---|---|
| Orange | 48V | Confirmed | |
| Orange* | GND | Confirmed | |
| Green | 16.5 V | FathomX, Battery | Confirmed |
Green* | GND | Confirmed | |
| Brown | - | Cut off | Confirmed |
| Brown* | 12V | Arduino | Confirmed |
| Blue | GND | Confirmed | |
| Blue* | 5 V | Raspberry PI | Confirmed |
* white marking on wire
1 Blue
2 Blue*
3 Green*
4 Brown*
5 Orange*
6 Green
7 Brown
8 Orange
Prototype
The prototype was made ba souldering the components on to a pcb board. The power converters passed the first test while unhooked from the system.
When testing powerconverters with the entire ROV the 48 - 12 V power converter capitulated. We heard a noise when we applied voltage and immediately turned it off.
The fault occured in the UWE Murata component.
PCB - Order
The new PCB has been ordered from EASY EDA with presouldered capacitors and resistor.
