...

1. Install one node at a time, either by reinstalling it using the 2023.1 modules/tags or by following this list::
   1. Run puppet with 2023.1 modules/tags

   2. Run systemctl stop puppet apache2

   3. Run apt-get purge placement-api placement-common python3-placement && apt-get autoremove && apt-get dist-upgrade
   4. Run puppet again

Nova

To upgrade nova without any downtime, follow this procedure

Preperations

Before the upgrades can be started it is important that all data from previous nova-releases are migrated to zed release. This is done like so:

• Run nova-manage db online_data_migrations on an API node. Ensure that it reports that nothing more needs to be done.

Nova API

1. In the node-specific hiera, disable the services at the first node you would like to upgrade with the keys

   1. apache::service_ensure: 'stopped'

2. Do one of:
   1. Run puppet with the 2023.1 modules/tags, Run apt dist-upgrade && apt-get autoremove
   2. Reinstall the node with 2023.1 modules/tags
3. Run nova-manage api_db sync
4. Run nova-manage db sync
5. Re-enable nova API on the upgraded node:
   
   1. Remove apache::service_ensure: 'stopped' from the upgraded node's hiera file
6. Upgrade the rest of the nodes (basically run step 2)

Nova-services

Either reinstall the node using the 2023.1 modules/tags, or follow this list:

1. Run puppet with the 2023.1 modules/tags
2. Run apt dist-upgrade && apt-get autoremove
3. Run puppet and restart services

Heat

The rolling upgrade procedure for heat includes a step where you are supposed to create a new rabbit vhost. I don't want that. Therefore, this is the cold upgrade steps.

1. Set apache::service_ensure: false, heat::api::enabled: false, heat::engine::enabled: false and heat::api_cfn::enabled: false in hiera to stop all services
2. Do one of:
   1. Run puppet with 2023.1 modules/tags, Run apt-get update && apt-get dist-upgrade && apt-get autoremove
   2. Reinstall the nodes with 2023.1 modules/tags
3. Run heat-manage db_sync on one of the api-nodes.

4. Remove the hiera keys that disabled the services and re-run puppet

Barbican

Barbican must be stopped for upgrades, and can thus be performed on all barbican hosts at the same time. It might be an idea to keep one set of hosts stopped at old code in case of the need for a sudden roll-back.

1. Stop all barbican-services by adding the following keys to node-specific hiera, and then make sure to run puppet on the barbican hosts:

   1. barbican::worker::enabled: false

   2. apache::service_ensure: 'stopped'

2. Run puppet with the 2023.1 modules/tags

3. Run apt dist-upgrade && apt-get autoremove

4. Run barbican-db-manage upgrade

5. Re-start barbican services by removing the keys added in step 1 and re-run puppet.

Magnum

Magnum must be stopped for upgrades, and can thus be performed on all magnum-hosts at the same time. It might be an idea to keep one set of hosts stopped at old code in case of the need for a sudden roll-back.

1. Stop all magnum-services by adding the following keys to node-specific hiera, and then make sure to run puppet on the magnum hosts:

   1. magnum::conductor::enabled: false

   2. apache::service_ensure: 'stopped'

2. Run puppet with the 2023.1 modules/tags

3. Run apt dist-upgrade && apt autoremove

4. Run su -s /bin/sh -c "magnum-db-manage upgrade" magnum

5. Re-start magnum services by removing the keys added in step 1 and re-run puppet.

6. Check if a new Fedora CoreOS image is required, and if new public cluster templates should be deployed. I.e to support a newer k8s version
   1. The official documentation provides a nice bit of help with this.

Octavia

Octavia must be stopped for upgrades, and can thus be performed on all octavia-hosts at the same time. It might be an idea to keep one set of hosts stopped at old code in case of the need for a sudden roll-back.

1. Stop all octavia-services by adding the following keys to hiera, and then make sure to run puppet on the octavia hosts:

   1. octavia::housekeeping::enabled: false

   2. octavia::health_manager::enabled: false

   3. octavia::api::enabled: false

   4. octavia::worker::enabled: false

2. Do one of:

   1. Reinstall the node with 2023.1 modules/tags

   2. Run puppet with the 2023.1 modules/tags, Run apt-get dist-upgrade && apt-get autoremove, Run puppet

3. Run octavia-db-manage upgrade head


4. Re-start octavia services by removing the keys added in step 1 and re-run puppet.

5. Build a 2023.1-based octavia-image and upload to glance. Tag it and make octavia start to replace the amphora.

Horizon

1. Run puppet with the 2023.1 modules/tags
2. Add the following to the node-specific hiera file for horizon nodes:
   1. apache::mod::wsgi::package_name: 'libapache2-mod-wsgi-py3'
   2. apache::mod::wsgi::mod_path: '/usr/lib/apache2/modules/mod_wsgi.so'
3. run apt dist-upgrade && apt autoremove

4. Run puppet again
5. restart apache2

Compute-nodes and GPU-nodes

When all APIs etc. are upgraded, it is time to do the same on the compute-nodes.

Preliminary tasks

 From 2023.1 and onwards the compute-nodes need to have its hypervisor UUID on disk, and we must thus list them in hiera. Use the following one-liner to populate the initial list in hiera:

$openstack hypervisor list -f value -c ID -c 'Hypervisor Hostname' --sort-column 'Hypervisor Hostname' | awk '{ print "  " $2 ": " $1}'

Paste the output from the above command into a suitable hiera-file (for instance create one called computeIDs.yaml) under the key 'ntnuopenstack::nova::compute::ids'.

Installing antelope (2023.1) on the compute-nodes:

Compute nodes are simple to upgrade:

1. Reinstall the node with 2023.1 modules/tags
2. Run "apt update; apt dist-upgrade -y" to get the correct openvswith packages.