Industrielle styresystemer - Wiki
...
INPUTS:
OUTPUTS:
Here OpenCMD is the signal which the controllers are going to use for commanding a valve to be opened, while valveSignal is the actual signal which is sendt to the Valve. Since none of the valves has any feedback system, It will just be trusted that they valves work.
The override input is utilized for external control of the valves . Here the override function can take in three values. These values are 0, 1 and 2 which are mapped to the following,
Override Value | Function |
---|---|
0 | Automatic |
1 | Manual Off |
2 | Manual On |
While the valveState gives information about the current state of the valves, ie which mode is it inn. The output is mapped to four values as shown below,
ValveState Value | Description |
---|---|
0 | Automatic Off |
1 | Automatic On |
2 | Manual Off |
3 | Manual On |