...

Then, after opening the module and navigating to the table editor, the "ListenAddress" and "ListenPort" properties must be set. The IP should be set to the IPv4 address of the Ethernet Adapter that is used to connect to the PLC, while the port should be set to 18831884. The IPv4 address can be found by opening the windows command window and typing the command "ipconfig".

...

After adding either, the topic must be set.

...

MQTT

...

"/status" Topic Overview (1 topic)

...

WAGO MQTT Setup

Setting up a WAGO PFC200 PLC requires some configuration.

1. Open the PLC's web server by entering its IP in a web browser and log in.
2. Press "Configuration" in the menu bar.
3. In the left menu, press "Cloud Connectivity".
4. Press "Connection 1".
5. Check Enabled.
6. Set "Cloud Platform" to "MQTT AnyCloud".
7. Set "Hostname" to the CDPStudio MQTTBroker's IP Address
8. Set "Port Number" to the chosen port (1883).
9. Set "Client ID" to a recognizable name such as "Wago".
10. Set "Data Protocol" to "Native MQTT".
11. Press "Submit".
12. Press "Reboot" in the top right corner

The Wago is now configured to send MQTT data to the broker correctly.

CODESYS Creating a Publisher

To use MQTT with CODESYS, the WagoAppCloud library must be imported to the project. This can be done by:

1. Press "Library Manager" in the current project.
2. Press "Add Library".
3. Expand "Application".
4. Select "WagoAppCloud"
5. Press OK.

A function block can then be created to simplify the use of the library:
Image Removed

Code Source: https://www.youtube.com/watch?v=UnhG15JFjao&t=822s&ab_channel=JugaadTech

This block can simply be added in a program like this:
Image Removed

Whenever the trigger gets a rising edge, it will publish the message to the broker.

CODESYS Creating a Subscriber

MQTT "/status" Topic Overview (1 topic)

MQTT "/settings" Topic Overview (32 topics)

...

PETERFORWIKI"/system" Topic Overview (8 topics)

MQTT "/system" Topic Overview (8 topics)