Versions Compared

Old Version 10

changes.mady.by.user Kevin Silbernagel

Saved on

compared with

New Version 11

changes.mady.by.user Peter Lingås

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Then, after opening the module and navigating to the table editor, the "ListenAddress" and "ListenPort" properties must be set. The IP should be set to the IPv4 address of the Ethernet Adapter that is used to connect to the PLC, while the port should be set to 18831884. The IPv4 address can be found by opening the windows command window and typing the command "ipconfig".

...

PETERFORWIKI"/system" Topic Overview (8 topics)

TopicDatatypeTypical RangePublisherDescription
'/state/valve/tank1/ebb'bool
PLCLight state, 0 = off, 1 = on.
'/state/valve/tank2/ebb'bool
PLCLight state. 0 = off, 1 = on
'/state/valve/tank1/flow'float
PLCTime until light 1 toggles on or off, given in hours.
'/state/valve/tank2/flow'float
PLCTime until light 2 toggles on or off, given in hours.
'/state/valve/threeway'



'/state/pump'













MQTT "/system" Topic Overview (8 topics)

...