...
When accessing the webinterface, you are presented with a login-page. The domain dropdown should be set to "NTNU accounts", and the "User Name" and "Password" fields should be populated with your NTNU username and password.
Dashboard
After a successful login (which is possible only if your user has access to at least one SkyHiGh project), you are presented with a dashboard. This dashboard displays your current resource usage and your current quota limits. The top of the interface shows your current project name (right above the pointer in the image).
...
First is the network-pane, which requires you to give the new network a name (do not change the other defaults):
The MTU field has a sane default, do not fill in a value here if you don't know what you are doing.
Then the network needs at least one subnet; and the first subnet is created in the "subnet" pane. Give it a name, choose "Enter Network Address manually", and select an IP range. It is not necessary to fill in anything for Gateway IP, it has a sane default (the first usable address in your selected subnet). See this article to see which addresses to select.
...
| Code Block | ||||
|---|---|---|---|---|
| ||||
#cloud-config
ssh_authorized_keys:
- <paste public key here>
|
After pressing "Launch Instance" the openstack plattform should need a couple of seconds before your machine is running. You can see your machine in the "Instance" list.
...
Select which network to allocate the floating IP from (what networks are available can be seen here). It should be the same network that were sellected when the router were created.
When an IP is allocated, it can be Associated to a certain VM:
...
How to actually access your virtual machine is described in this page.