This page documents the Version 1, Revision 1 (V1R1) electronics design of the hyperspectral imager. If you are working on the firmware or integration of the HSI payload, you should find everything you need here (when it is finished).
Full Assembly
| Carrier Board | Carrier Board + Optics | Carrier Board + Optics + FPGA Board |
|---|---|---|
 |  |  |
...
USB connection for debugging. It is connected to UART through a FTDI USB-UART bridge that provides USB driver firmware, meaning there's no need to install a driver and it can be read/written using a regular terminal with baud rates up to 3 million symbols per second.
| icoZed PicoZed Pin | Functionality | Comment |
|---|---|---|
| PS_MIO_14 | TX | |
| PS_MIO_15 | RX |
USB 2.0 Connection
| PicoZed Pin | Functionality | Comment |
|---|---|---|
| POWER_5V | ||
| Data+ | ||
| Data- | ||
| Ground |
External Connector (Bus Connector)
| Connector Number | PicoZed Pin | Functionality | Comment |
|---|---|---|---|
| 1 | |||
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| 7 | |||
| 8 |
JTAG Connector
| PicoZed Pin | Functionality | Comment |
|---|---|---|
| JTAG_TCK | ||
| JTAG_TMS | ||
| JTAG_TDO | ||
| JTAG_TDI | ||
| INIT |
Mechanical Design
LED Indicators
Board Outline and Material
The board is mounted on
Production Design Files
| Type | File | Kind | Comment | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Schematic |
| Missing watermark + not made pretty yet. | |||||||
| Gerber | ntnu-hsi-prototype-SlotHoles.TXT | NC Drill Top Solder Top Paste Top Overlay Top Signal Top Pad Bottom Pad Middle Signal Middle Signal Board Outline Gerber drill Bottom Solder Bottom Paste Bottom Overlay Bottom Signal | Gerber files sent to production, not that slots are in a separate drill file. | ||||||
| Altium Designer | Altium Designer 17 project files |
...