Application of Open-air Capacitive Sensors for Voltage Monitoring near Terminations in HV and EHV Insulated Connections
DOI :
https://doi.org/10.5324/nordis.v0i26.3281Résumé
Contactless capacitive sensors are applied to monitor
(over)voltages near the overhead line terminations of a
substation or at cable to line transitions. The sensor response is
the signal time derivative when loaded with a resistive
impedance and the waveform is restored by integration. As part
of this differentiating/integrating (D/I) measuring concept, the
use of open-air sensors results in excellent EMC characteristics
but the inherent cross-coupling to other phases has to be dealt
with. Three applications are presented: 1) For a 150 kV cable
termination the partial discharge activity needs to be related to
momentary phase voltages; 2) Measured slow front overvoltage
at a 380 kV cable termination from line energization
are compared with predictions from numerical simulation; 3)
The perspectives of employing the D/I method for (very) fast
front overvoltages near a 380 kV circuit breaker are examined.
Téléchargements
Téléchargements
Publié-e
Numéro
Rubrique
Licence
Proceedings of the Nordic Insulation Symposium licenses all content of the journal under a Creative Commons Attribution (CC-BY) licence. This means, among other things, that anyone is free to copy and distribute the content, as long as they give proper credit to the author(s) and the journal. For further information, see Creative Commons website for human readable or lawyer readable versions.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
