DC-biased dielectric measurements using an existing frequency-domain spectroscopy (FDS) instrument and series battery
DOI:
https://doi.org/10.5324/nordis.v27i1.4717Resumen
We present a simple method for adding DC bias to frequency-domain spectroscopy (FDS) measurements by inserting a battery in series in the ‘high’ lead to the device under test. An instrument designed for FDS measurements with pure AC can be used in this way without modification, even for DC voltages above the instrument’s AC range. Issues and limitations of the method are discussed, along with some alternative methods. Experimental results from FDS measurements on well defined linear objects are compared with/without the DC bias, to check that the measurement is not disturbed by the DC source. The only detected difference was the expected effect of including the battery impedance in series with the specimen in the measurement. This effect was negligible for typical lab-specimen capacitances, around and below power frequency. The nature of battery impedance is further described, as multiple small batteries in series can strongly affect the results for large specimens and at high frequencies.
Descargas
Descargas
Archivos adicionales
Publicado
Número
Sección
Licencia
Derechos de autor 2022 Nathaniel Taylor, Jing Hao
Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
Proceedings of the Nordic Insulation Symposium licenses all content of the journal under a Creative Commons Attribution (CC-BY) licence. This means, among other things, that anyone is free to copy and distribute the content, as long as they give proper credit to the author(s) and the journal. For further information, see Creative Commons website for human readable or lawyer readable versions.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
