Possibilities of Conventional PD Measurements with Non-Sinusoidal Waveforms for Electric Vehicles
DOI:
https://doi.org/10.5324/nordis.v27i1.4583Resumé
Electrical traction machines in electric vehicles are normally fed by converters with DC link voltages up to 800 V. The resulting voltage pulses place particular stress on the insulating system of the drivetrain. In order to be able to investigate insulating material samples, e.g. twisted pair enameled wire, with voltages of different shapes and high frequency, a shielded experimental
setup for the investigation of partial discharges (PD) at low voltages and high frequencies is presented. A medium frequency transformer with a frequency range up to 2500 Hz is used for this purpose, fed by a linear power amplifier on the primary side. The amplifier has a slew rate of 52 V/μs and is capable of sourcing various voltage waveforms such as sinusiodal, triangular
or rectangular, with a maximum frequency of 30 kHz. Electrical PD measuring methods according to IEC 60270 as well as acoustic and optical measurement methods are applied for PD diagnosis. The experimental setup is intended to demonstrate the possibilities and limitations of conventional PD diagnostics for nonsinusoidal voltages. Focus is placed on the application of filters, the damping behavior of the step-up transformer and the rise times of the voltages.
Downloads
Downloads
Publiceret
Nummer
Sektion
Licens
Copyright (c) 2022 Maurizio Zajadatz, Michael Suriyah, Thomas Leibfried
Dette værk er under følgende licens Creative Commons Navngivelse (by).
Proceedings of the Nordic Insulation Symposium licenses all content of the journal under a Creative Commons Attribution (CC-BY) licence. This means, among other things, that anyone is free to copy and distribute the content, as long as they give proper credit to the author(s) and the journal. For further information, see Creative Commons website for human readable or lawyer readable versions.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
