Round robin investigation on the cyclic triaxial test for unbound granular materials

Авторы

  • Inge Hoff SINTEF, Technology and Society, Road and Railway Engineering, Trondheim, Norwa
  • H. Arvidsson Swedish National Road and Transport Research Institute, Highway Engineering, Linköping, Sweden
  • S. Erlingsson University of Iceland, Engineering Research Institute, Reykjavik, Iceland
  • L.J.M. Houben Delft University of Technology, Road and Railway Engineering, Delft, The Netherlands
  • P. Kolisoja Tampere University of Technology, Institute of Structural Engineering, Tampere, Finland
  • C.W. Schwartz University of Maryland, Civil Engineering, College Park, Maryland, USA

Ключевые слова:

Triaxial testing, Unbound granular materials, Round robin test, Resilient modulus

Аннотация

A new European standard for cyclic triaxial testing of unbound granular materials was approved by CEN in 2004. In the final stages of preparation of the standard it was decided to organize a round robin analysis with invitation to laboratories in Europe that have been doing research using this type of tests. Nine different laboratories received the material and six laboratories performed the tests. Only one material at one target dry density and water content was investigated. Most of the laboratories performed three parallel tests. This is obviously too few tests for a statistically sound validation of the tests. However, some indication about the accuracy of the test was found.

Скачивания

Данные скачивания пока недоступны.

Загрузки

Опубликован

2019-07-30

Выпуск

2005: Proceedings Seventh International Conference on the Bearing Capacity of Roads, Railways and Airfields

Раздел

Articles