Performance assessment and ranking of natural and recycled granular materials for road subbase layers by precision cyclic triaxial testing (EN 13286-7)

Résumé

The cyclic load triaxial test is a laboratory test that allows investigating the
mechanical behaviour (resilient and permanent strains) of unbound granular materials used in
subbase and capping layers of roads. The resilient modulus and permanent strains are required
to assess material performance and serve as key input properties in modelling and designing
roads.
This paper will present the investigation of resilient and permanent strains as specified by
European standard EN 13286-7, for a limestone aggregate and recycled materials (one
crushed concrete aggregate and two blended crushed waste aggregates) used in subbases and
capping layers of road structures in Belgium. Method B (constant confining pressure) was
used in most of the tests for resilient strains. The influence of water content was also
analysed. Permanent strains were analysed after conditioning by 20,000 cycles of single-stage
loading.
The paper will also present the results obtained on the limestone aggregate only in
analysing resilient strains with both axial and confining cyclic loading – method A. The
resilient moduli were deduced from the test results and compared to those obtained with
method B.
The calibration of the LDT’s (Local Deformation Transducer) in air proved to remain valid
when they were used in water (variable confining pressure tests).
The natural and recycled materials were ranked starting from the characteristic values of
resilient modulus and characteristic permanent axial strain. This ranking based on a
mechanistic approach was compared with conventional ranking based on indicative properties
determined in empirical tests.
This research work produced an excellent set of findings for the mechanical
characterization of unbound subbase materials through the cyclic triaxial test, thus
contributing to a more widespread and common use of recycled materials in geotechnical
engineering.