2024

• Wang, Yaping; Fagermo, Moa; Furu, Trond; Justnes, Harald; Marthinsen, Knut. (2024) Compatibility of Different Aluminium with a New Environmental-Friendly Concrete. Advances in Science and Technology
  Vitenskapelig artikkel
• Han, F.; Luo, X.; Liu, Q.; Hou, Z.; Marthinsen, Knut; Wu, G.L.. (2024) The effect of grain size and rolling reduction on microstructure evolution and annealing hardening response of a Mg-3Gd alloy. Journal of Magnesium and Alloys
  Vitenskapelig artikkel
• Hennum, Endre Asheim; Marthinsen, Knut; Tundal, Ulf Håkon. (2024) Effect of Microstructure on the Precipitation of β-Mg2Si during Cooling after Homogenisation of Al-Mg-Si Alloys. Metals
  Vitenskapelig artikkel
• Han, Fang; Luo, Xuan; Marthinsen, Knut; Wu, Guilin; Hou, Ziyong; Huang, Xiaoxu. (2024) Effect of initial grain size on the recrystallization behavior and recrystallization texture of a Mg–3Gd alloy. Journal of Materials Science & Technology
  Vitenskapelig artikkel
• Imani Aria, Arash; Holmedal, Bjørn; Manik, Tomas; Marthinsen, Knut. (2024) A Full-Field Crystal Plasticity Study on the Bauschinger Effect Caused by Non-Shearable Particles and Voids in Aluminium Single Crystals. Metals
  Vitenskapelig artikkel
• Imani Aria, Arash; Holmedal, Bjørn; Manik, Tomas; Marthinsen, Knut. (2024) Crystal-plasticity modelling of the yield surfaces and anelasticity in the elastoplastic transition of metals. European Journal of Mechanics. A, Solids
  Vitenskapelig artikkel
• Zhang, Kai; Wenner, Sigurd; Marioara, Calin Daniel; Hovig, Even Wilberg; Du, Qiang; Onsøien, Morten Ingar. (2024) Additive Manufacturing of 7xxx Aluminium Alloys by Laser Powder Bed Fusion. IOP Conference Series: Materials Science and Engineering
  Vitenskapelig artikkel

2023

• Imani Aria, Arash; Manik, Tomas; Holmedal, Bjørn; Marthinsen, Knut. (2023) A computational study on efficient yield surface calibrations using a crystal plasticity spectral solver. Multiscale and Multidisciplinary Modeling, Experiments and Design
  Vitenskapelig artikkel
• Ånes, Håkon Wiik; Van Helvoort, Antonius; Marthinsen, Knut. (2023) Orientation dependent pinning of (sub)grains by dispersoids during recovery and recrystallization in an Al–Mn alloy. Acta Materialia
  Vitenskapelig artikkel
• Xu, Jianbin; Hopperstad, Odd Sture; Holmedal, Bjørn; Berstad, Torodd; Manik, Tomas; Marthinsen, Knut. (2023) On the spatio-temporal characteristics of the Portevin-Le Chatelier effect in aluminium alloy AA5182: An experimental and numerical study. International journal of plasticity
  Vitenskapelig artikkel

2022

• Xu, Jianbin; Holmedal, Bjørn; Hopperstad, Odd Sture; Manik, Tomas; Marthinsen, Knut. (2022) Dynamic strain ageing in an AlMg alloy at different strain rates and temperatures: Experiments and constitutive modelling. International journal of plasticity
  Vitenskapelig artikkel
• Xu, Jianbin; Liu, Lei; Hopperstad, Odd Sture; Holmedal, Bjørn; Manik, Tomas; Marthinsen, Knut. (2022) A simple method enabling efficient quantitative analysis of the Portevin–Le Chatelier band characteristics. Scripta Materialia
  Vitenskapelig artikkel
• Ånes, Håkon Wiik; Van Helvoort, Antonius; Marthinsen, Knut. (2022) Correlated subgrain and particle analysis of a recovered Al-Mn alloy by directly combining EBSD and backscatter electron imaging. Materials Characterization
  Vitenskapelig artikkel
• Thronsen, Elisabeth; Mørkeseth, Hanne; Marioara, Calin Daniel; Minakuchi, Kazuhiro; Katsumi, Tetsuya; Marthinsen, Knut. (2022) The Effect of Small Additions of Fe and Heavy Deformation on the Precipitation in an Al–1.1Mg–0.5Cu–0.3Si At. Pct Alloy. Metallurgical and Materials Transactions A
  Vitenskapelig artikkel

2021

• Manik, Tomas; Marthinsen, Knut; Zhang, Kai; Imani Aria, Arash; Holmedal, Bjørn. (2021) Deformation Texture Evolution in Flat Profile AlMgSi Extrusions: Experiments, FEM, and Crystal Plasticity Modeling. Frontiers in Materials
  Vitenskapelig artikkel
• Håland, Kari; Marthinsen, Knut; Dahl, Nina. (2021) Vil du kjøre en bil bygd av resirkulerte materialer. Adresseavisen
  Kronikk
• Xu, Jianbin; Marthinsen, Knut; Holmedal, Bjørn; Hopperstad, Odd Sture. (2021) An experimental and numerical study of the Portevin-Le Chatelier effect in an AlMg alloy. Norwegian University of Science and Technology
  Doktorgradsavhandling
• Khalid, Muhammad Zeeshan; Friis, Jesper; Ninive, Per Harald; Marthinsen, Knut; Ringdalen, Inga Gudem; Strandlie, Are. (2021) Modified embedded atom method potential for Fe-Al intermetallics mechanical strength: A comparative analysis of atomistic simulations . Physica. B, Condensed matter
  Vitenskapelig artikkel
• Khalid, Muhammad Zeeshan; Friis, Jesper; Ninive, Per Harald; Marthinsen, Knut; Strandlie, Are. (2021) First-principles study of tensile and shear strength of Fe-Al and α-AlFeSi intermetallic compound interfaces . Computational Materials Science
  Vitenskapelig artikkel
• Xu, Jianbin; Holmedal, Bjørn; Hopperstad, Odd Sture; Marthinsen, Knut. (2021) Experimental Characterization and Modelling of the PLC Effect in an AlMg-Alloy. Materials Science Forum
  Vitenskapelig artikkel
• Khalid, Muhammad Zeeshan; Friis, Jesper; Ninive, Per Harald; Marthinsen, Knut; Ringdalen, Inga Gudem; Strandlie, Are. (2021) First-principles study of tensile and shear strength of an Fe2Al5//Fe interface . Computational Materials Science
  Vitenskapelig artikkel

2020

• Khalid, Muhammad Zeeshan; Friis, Jesper; Ninive, Per Harald; Marthinsen, Knut; Strandlie, Are. (2020) Ab-initio study of atomic structure and mechanical behaviour of Al / Fe intermetallic interfaces . Computational Materials Science
  Vitenskapelig artikkel
• Fang, X.W.; Xiao, H.; Marthinsen, Knut; Belyakov, Andrey; Fang, X.Y.; Huang, Ke. (2020) Tailoring microstructure and texture of annealed Al-Mn alloy through the variation of homogenization and prior cold deformation strain. Materials Characterization
  Vitenskapelig artikkel
• Xie, Zhiqiang; Jia, Zhihong; Xiang, Kaiyun; Kong, Yaping; Li, Zhenguo; Fan, Xi. (2020) Microstructure Evolution and Recrystallization Resistance of a 7055 Alloy Fabricated by Spray Forming Technology and by Conventional Ingot Metallurgy. Metallurgical and Materials Transactions A
  Vitenskapelig artikkel
• Marthinsen, Knut; Huang, Ke; Wang, Ning. (2020) Modeling of Recrystallization of Commercial Particle Containing Al-Alloys. Nova Science Publishers
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
• Ånes, Håkon Wiik; Hjelen, Jarle; Sørensen, Bjørn Eske; Van Helvoort, Antonius; Marthinsen, Knut. (2020) Processing and indexing of electron backscatter patterns using open-source software. IOP Conference Series: Materials Science and Engineering
  Vitenskapelig artikkel

2019

• Bunkholt, Sindre; Nes, Erik Aasmund; Marthinsen, Knut. (2019) Orientation independent and dependent subgrain growth during iso-thermal annealing of high- purity and commercial purity aluminium. Metals
  Vitenskapelig artikkel
• Ånes, Håkon Wiik; Van Helvoort, Antonius; Marthinsen, Knut. (2019) In-situ observations of dislocation recovery and low angle boundary formation in deformed aluminium. Journal of Physics: Conference Series (JPCS)
  Vitenskapelig artikkel
• Jia, Hailong; Marthinsen, Knut; Li, Yanjun. (2019) Revealing abnormal {11-21} twins in commercial purity Ti subjected to split Hopkinson pressure bar. Journal of Alloys and Compounds
  Vitenskapelig artikkel
• Remøe, Magnus Sætersdal; Westermann, Ida; Marthinsen, Knut. (2019) Characterization of the Density and Spatial Distribution of Dispersoids in Al-Mg-Si Alloys. Metals
  Vitenskapelig artikkel
• Thronsen, Elisabeth; Marioara, Calin Daniel; Sunde, Jonas Kristoffer; Minakuchi, Kazuhiro; Katsumi, Tetsuya; Erga, Iven. (2019) The effect of heavy deformation on the precipitation in an Al-1.3Cu-1.0Mg-0.4Si wt.% alloy. Materials & design
  Vitenskapelig artikkel
• Marthinsen, Knut; Alvem, Andreas. (2019) Precipitation hardening in two Al-Mn-Cu-Mg-Si alloys aimed for brazed heat exchangers. Norges Teknisk Naturvitenskapelige Universitet (NTNU)
  Mastergradsoppgave

2018

• Christiansen, Emil; Marioara, Calin Daniel; Marthinsen, Knut; Hopperstad, Odd Sture; Holmestad, Randi. (2018) Lattice rotations in precipitate free zones in an Al-Mg-Si alloy. Materials Characterization
  Vitenskapelig artikkel
• Khalid, Muhammad Zeeshan; Friis, Jesper; Ninive, Per Harald; Marthinsen, Knut; Strandlie, Are. (2018) DFT calculations based insight into bonding character and strength of Fe2Al5 and Fe4Al13 intermetallics at Al-Fe joints . Procedia Manufacturing
  Vitenskapelig artikkel
• Huang, Ke; Marthinsen, Knut; Zhao, Qinglong; Loge, Roland E.. (2018) The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials. Progress in Materials Science
  Vitenskapelig oversiktsartikkel/review
• Zhao, Qinglong; ZHANG, Hui-di; Huang, Ke; Marthinsen, Knut. (2018) Correlating oriented grain number density of recrystallisation in particle-containing aluminium alloys. Transactions of Nonferrous Metals Society of China
  Vitenskapelig artikkel
• Zhang, Kai; Marthinsen, Knut; Holmedal, Bjørn; Aukrust, Trond; Segatori, Antonio. (2018) Through thickness variations of deformation texture in round profile extrusions of 6063-type aluminium alloy: Experiments, FEM and crystal plasticity modelling. Materials Science & Engineering: A
  Vitenskapelig artikkel
• Nakayasu, Hiroki; Kobayashi, Equo; Sato, Tatsuo; Holmestad, Randi; Marthinsen, Knut. (2018) Orientation relationships of phase transformation in α-Al12Mn3Si pseudomorphs after plate-like Al6Mn precipitate in an AA3004 Al-Mn based alloy. Materials Characterization
  Vitenskapelig artikkel
• Khalid, Muhammad Zeeshan; Friis, Jesper; Ninive, Per Harald; Marthinsen, Knut; Strandlie, Are. (2018) A First-Principles Study of the Al (001)/Fe(0-11) Interface . Materials Science Forum
  Vitenskapelig artikkel
• Zhang, Kai; Marthinsen, Knut; Holmedal, Bjørn; Aukrust, Trond; Segatori, Antonio. (2018) EVOLUTION IN TEXTURE AND ITS THROUGH-THICKNESS VARIATIONS IN Al-Mg-Si-EXTRUSIONS: EXPERIMENTS AND MODELLING. Canadian Institute of Mining, Metallurgy and Petroleum
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
• Remøe, Magnus Sætersdal; Westermann, Ida; Marthinsen, Knut. (2018) A METHODOLOGY TO ASSESS THE SPATIAL DISTRIBUTION OF DISPERSOIDS IN AL-MG-Si ALLOYS. Canadian Institute of Mining, Metallurgy and Petroleum
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
• Jia, Hailong; Bjørge, Ruben; Cao, Lingfei; Hui, Song; Marthinsen, Knut; Li, Yanjun. (2018) Quantifying the grain boundary segregation strengthening induced by post-ECAP aging in an Al-5Cu alloy. Acta Materialia
  Vitenskapelig artikkel
• Zhao, Dongdong; Løvvik, Ole Martin; Marthinsen, Knut; Li, Yanjun. (2018) Segregation of Mg, Cu and their effects on the strength of Al Σ5 (210)[001] symmetrical tilt grain boundary. Acta Materialia
  Vitenskapelig artikkel

2017

• Remøe, Magnus Sætersdal; Marthinsen, Knut; Westermann, Ida; Pedersen, Ketill Olav; Røyset, Jostein; Marioara, Calin Daniel. (2017) The effect of alloying elements on the ductility of Al-Mg-Si alloys. Materials Science & Engineering: A
  Vitenskapelig artikkel
• Remøe, Magnus Sætersdal; Marthinsen, Knut; Westermann, Ida; Pedersen, Ketill Olav; Røyset, Jostein; Reiso, Oddvin. (2017) The Effect of Heating Rate on the Density and Spatial Distribution of Dispersoids during Homogenisation of 6xxx Aluminium Alloys. Materials Science Forum
  Vitenskapelig artikkel
• Zhang, Kai; Marthinsen, Knut; Holmedal, Bjørn; Friis, Jesper; Pettersen, Tanja; Segatori, Antonio. (2017) Characterization and Modelling of the Microstructure and Texture Evolution In AlMgSi-Extrusions. Materials Science Forum
  Vitenskapelig artikkel
• Zhao, Dongdong; Løvvik, Ole Martin; Marthinsen, Knut; Li, Yanjun. (2017) Twinnability of Al–Mg alloys: A first-principles interpretation. Transactions of Nonferrous Metals Society of China
  Vitenskapelig artikkel
• Jia, Hailong; Bjørge, Ruben; Marthinsen, Knut; Li, Yanjun. (2017) The deformation and work hardening behaviour of a SPD processed Al-5Cu alloy. Journal of Alloys and Compounds
  Vitenskapelig artikkel
• Jia, Hailong; Marthinsen, Knut; Li, Yanjun. (2017) Al-5Cu alloy processed by equal-channel angular pressing. Materials Science Forum
  Vitenskapelig artikkel
• Zhao, Dongdong; Løvvik, Ole Martin; Marthinsen, Knut; Li, Yanjun. (2017) Combined effect of Mg and vacancy on the generalized planar fault energy of Al. Journal of Alloys and Compounds
  Vitenskapelig artikkel
• Jia, Hailong; Marthinsen, Knut; Li, Yanjun. (2017) Effect of soft Bi particles on grain refinement during severe plastic deformation. Transactions of Nonferrous Metals Society of China
  Vitenskapelig artikkel
• Jia, Hailong; Bjørge, Ruben; Marthinsen, Knut; Mathiesen, Ragnvald; Li, Yanjun. (2017) Soft particles assisted grain refinement and strengthening of an Al-Bi-Zn alloy subjected to ECAP. Materials Science & Engineering: A
  Vitenskapelig artikkel
• Bunkholt, Sindre; Nes, Erik Aasmund; Marthinsen, Knut. (2017) The effect of iron and the precipitation behavior of iron during annealing of a cold deformed commercial purity aluminium alloy. Materials Characterization
  Vitenskapelig artikkel
• Huang, Ke; Zhang, Kai; Marthinsen, Knut; Loge, RE. (2017) Controlling grain structure and texture in Al-Mn from the competition between precipitation and recrystallization. Acta Materialia
  Vitenskapelig artikkel

2016

• Jin, Shenbao; Marthinsen, Knut; Li, Yanjun. (2016) Formation of {11-21} twin boundaries in titanium by kinking mechanism through accumulative dislocation slip. Acta Materialia
  Vitenskapelig artikkel
• Zhao, Qinglong; Huang, Ke; Li, Yanjun; Marthinsen, Knut. (2016) Orientation Preference of Recrystallization in Supersaturated Aluminum Alloys Influenced by Concurrent Precipitation. Metallurgical and Materials Transactions A
  Vitenskapelig artikkel
• Wang, Ning; Huang, Ke; Li, Yanjun; Marthinsen, Knut. (2016) The influence of processing conditions on microchemistry and the softening behavior of cold rolled Al-Mn-Fe-Si alloys. Metals
  Vitenskapelig artikkel
• Zhao, Dongdong; Løvvik, Ole Martin; Marthinsen, Knut; Li, Yanjun. (2016) Impurity effect of Mg on the generalized planar fault energy of Al. Journal of Materials Science
  Vitenskapelig artikkel

2015

• Zhang, Kai; Marthinsen, Knut; Holmedal, Bjørn; Aukrust, Trond; Segatori, A. (2015) Coupled FEM and Alamel-type polycrystal plasticity modelling applied to extrusion of aluminium alloys. Materials Today: Proceedings
  Vitenskapelig artikkel
• Huang, Ke; Loge, RE; Marthinsen, Knut. (2015) On the sluggish recrystallization of a cold-rolled Al–Mn–Fe–Si alloy. Journal of Materials Science
  Vitenskapelig artikkel
• Jin, Shenbao; Zhang, Kai; Bjørge, Ruben; Tao, NR; Marthinsen, Knut; Lu, K. (2015) Formation of incoherent deformation twin boundaries in a coarse-grained Al-7Mg alloy. Applied Physics Letters
  Vitenskapelig artikkel
• Huang, Ke; Marthinsen, Knut. (2015) The influence of microchemistry and processing conditions on the softening behavior of cold-rolled Al-Mn-Fe-Si alloys. Light Metals
  Vitenskapelig artikkel
• Huang, Ke; Engler, Olaf; Li, Yanjun; Marthinsen, Knut. (2015) Evolution in microstructure and properties during non-isothermal annealing of a cold-rolled Al-Mn-Fe-Si alloy with different microchemistry states. Materials Science & Engineering: A
  Vitenskapelig artikkel
• Huang, Ke; Marthinsen, Knut. (2015) The effect of heating rate on the softening behaviour of a deformed Al-Mn alloy with strong and weak concurrent precipitation. Materials Characterization
  Vitenskapelig artikkel
• Ryen, Øyvind; Holmedal, Bjørn; Marthinsen, Knut; Furu, Trond. (2015) Precipitation, strength and work hardening of age hardened aluminium alloys. IOP Conference Series: Materials Science and Engineering
  Vitenskapelig artikkel
• Zhang, Kai; Pettersen, Tanja; Paulsen, Christian Oen; Marthinsen, Knut; Holmedal, Bjørn; Segatori, A. (2015) Recrystallization behaviour of AA6063 extrusions. IOP Conference Series: Materials Science and Engineering
  Vitenskapelig artikkel
• Jin, Shenbao; Tao, Nairong; Marthinsen, Knut; Li, Yanjun. (2015) Deformation of an Al-7Mg alloy with extensive structural micro-segregations during dynamic plastic deformation. Materials Science & Engineering: A
  Vitenskapelig artikkel
• Huang, Ke; Zhao, Qinglong; Li, Yanjun; Marthinsen, Knut. (2015) Two-stage annealing of a cold-rolled Al-Mn-Fe-Si alloy with different microchemistry states. Journal of Materials Processing Technology
  Vitenskapelig artikkel
• Huang, Ke; Li, Yanjun; Marthinsen, Knut. (2015) Factors affecting the strength of P{011}〈566〉-texture after annealing of a cold-rolled Al–Mn–Fe–Si alloy. Journal of Materials Science
  Vitenskapelig artikkel
• Huang, Ke; Li, Yanjun; Marthinsen, Knut. (2015) The influence of microchemistry on the recrystallization texture of cold-rolled Al-Mn-Fe-Si alloys. IOP Conference Series: Materials Science and Engineering
  Vitenskapelig artikkel
• Huang, Ke; Li, Yanjun; Marthinsen, Knut. (2015) Effect of heterogeneously distributed pre-existing dispersoids on the recrystallization behavior of a cold-rolled Al-Mn-Fe-Si alloy. Materials Characterization
  Vitenskapelig artikkel

2014

• Bunkholt, Sindre; Marthinsen, Knut; Nes, Erik Aasmund. (2014) Subgrain structures characterized by electron backscatter diffraction (EBSD). Materials Science Forum
  Vitenskapelig artikkel
• Huang, Ke; Li, Yanjun; Marthinsen, Knut. (2014) Isothermal annealing of cold-rolled Al−Mn−Fe−Si alloy with different microchemistry states. Transactions of Nonferrous Metals Society of China
  Vitenskapelig artikkel
• Marthinsen, Knut; Wang, Ning; Huang, Ke. (2014) Modelling microstructure and properties during annealing of coldrolled Al-Mn-Fe-Si-alloys with different microchemistries. Materials Science Forum
  Vitenskapelig artikkel
• Gulbrandsen-Dahl, Sverre; Marthinsen, Knut. (2014) Hardening of Al-Mg-Si Alloys and effective particle size in microstructural models. Materials Science Forum
  Vitenskapelig artikkel
• Hersent, Emmanuel C; Marthinsen, Knut; Nes, Erik Aasmund. (2014) A Solute Pinning Approach to Solute Drag in Multi-Component Solid Solution Alloys. Modeling and Numerical Simulation of Material Science
  Vitenskapelig artikkel
• Hersent, Emmanuel C; Marthinsen, Knut; Nes, Erik Aasmund. (2014) On the Effect of Atoms in Solid Solution on Grain Growth Kinetics. Metallurgical and Materials Transactions A
  Vitenskapelig artikkel
• Huang, Ke; Li, Yanjun; Marthinsen, Knut. (2014) Microstructural evolution during isothermal annealing of a cold-rolled Al-Mn-Fe-Si alloy with different microchemistry states. Materials Science Forum
  Vitenskapelig artikkel
• Zhang, Kai; Holmedal, Bjørn; Marthinsen, Knut; Hopperstad, Odd Sture; Dumoulin, Stephane. (2014) Multi-level Modelling of Plastic Anisotropy of Aluminium Alloys Using Crystal Plasticity Models and Advanced Yield Functions. NTNU-trykk
  Doktorgradsavhandling
• Marthinsen, Knut; Holmedal, Bjørn; Li, Yanjun. (2014) Aluminium Alloys 2014 - ICAA14. Materials Science Forum (1-2)
  Vitenskapelig antologi/Konferanseserie
• Huang, Ke; Li, Yanjun; Marthinsen, Knut. (2014) Isothermal and non-isothermal annealing of cold-rolled Al-Mn-Fe-Si alloys with different microchemistry states. Materials Science Forum
  Vitenskapelig artikkel
• Saito, Takeshi; Marioara, Calin Daniel; Røyset, Jostein; Marthinsen, Knut; Holmestad, Randi. (2014) The effects of quench rate and pre-deformation on precipitation hardening in Al–Mg–Si alloys with different Cu amounts. Materials Science & Engineering: A
  Vitenskapelig artikkel
• Ehlers, Flemming J H; Dumoulin, Stephane; Marthinsen, Knut; Holmestad, Randi. (2014) Interfacial and strain energy analysis from ab initio based hierarchical multi-scale modelling: the Al–Mg–Si alloy β'' phase. Materials Science Forum
  Vitenskapelig artikkel
• Huang, Ke; Wang, Ning; Li, Yanjun; Marthinsen, Knut. (2014) The influence of microchemistry on the softening behaviour of two cold-rolled Al-Mn-Fe-Si alloys. Materials Science & Engineering: A
  Vitenskapelig artikkel

2013

• Teichmann, Katharina; Marioara, Calin Daniel; Andersen, Sigmund Jarle; Marthinsen, Knut. (2013) TEM study of beta ' precipitate interaction mechanisms with dislocations and beta ' interfaces with the aluminium matrix in Al-Mg-Si alloys. Materials Characterization
  Vitenskapelig artikkel
• Ehlers, Flemming J H; Dumoulin, Stephane; Marthinsen, Knut; Holmestad, Randi. (2013) Interface energy determination for the fully coherent β'' phase in Al-Mg-Si: making a case for a first principles based hybrid atomistic modelling scheme. Modelling and Simulation in Materials Science and Engineering
  Vitenskapelig artikkel
• Marthinsen, Knut; Friis, Jesper; Engler, Olaf. (2013) Modelling time-dependent nucleation of recrystallization in aluminium alloys. Materials Science Forum
  Vitenskapelig artikkel
• Furu, Jørgen; Marthinsen, Knut; Bergstrøm, Trond Harald; Buchholz, Andreas. (2013) An Experimental and Numerical Study of Heat Transfer in Aluminium Melting and Remelting Furnaces. Doktoravhandlinger ved NTNU (30)
  Doktorgradsavhandling
• Bunkholt, Sindre; Marthinsen, Knut; Nes, Erik Aasmund. (2013) Subgrain growth, recovery kinetics and nucleation of recrystallization of cold deformed aluminium alloys. Doktoravhandlinger ved NTNU (330)
  Doktorgradsavhandling
• Zhao, Qinglong; Holmedal, Bjørn; Marthinsen, Knut; Li, Yanjun. (2013) The influence of Mn, Fe and Si on the work hardening of aluminium alloys. Doktoravhandlinger ved NTNU (16)
  Doktorgradsavhandling
• Govindaraj, Nagaraj Vinayagam; Holmedal, Bjørn; Marthinsen, Knut. (2013) Light-weight materials produced by accumulative roll bonding. Doktoravhandlinger ved NTNU (114)
  Doktorgradsavhandling
• Mánik, Tomás; Holmedal, Bjørn; Hopperstad, Odd Sture; Marthinsen, Knut. (2013) Plastic-Anisotropy Modelling: Textrue, Strain-Rate and Strain-Path Changes. Doktoravhandlinger ved NTNU (304)
  Doktorgradsavhandling
• Wang, Ning; Marthinsen, Knut; Li, Yanjun; Holmedal, Bjørn; Engler, Olaf. (2013) Softening behaviour of Al-Mn-Fe-Si alloys during isothermal annealing. Doktoravhandlinger ved NTNU (358)
  Doktorgradsavhandling
• Hersent, Emmanuel C; Marthinsen, Knut; Nes, Erik Aasmund. (2013) The Effect of Solute Atoms on Grain Boundary Migration: A Solute Pinning Approach. Metallurgical and Materials Transactions A
  Vitenskapelig artikkel
• Bunkholt, Sindre; Marthinsen, Knut; Nes, Erik Aasmund. (2013) Recovery Kinetics in High Purity and Commercial Purity Aluminium Alloys. Materials Science Forum
  Vitenskapelig artikkel
• Hersent, Emmanuel C; Huang, Ke; Friis, Jesper; Marthinsen, Knut. (2013) Modelling the evolution in microchemistry and its effects on the softening behavior of cold rolled AlFeMnSi-alloys during annealing. Materials Science Forum
  Vitenskapelig artikkel
• Wang, Ning; Li, Yanjun; Marthinsen, Knut. (2013) Characterization the softening behavior of cold rolled AlMnFeSi-alloys during conditions of concurrent precipitation. Materials Science Forum
  Vitenskapelig artikkel
• Teichmann, Katharina; Marioara, Calin Daniel; Pedersen, Ketill Olav; Marthinsen, Knut. (2013) The effect of simultaneous deformation and annealing on the precipitation behaviour and mechanical properties of an Al-Mg-Si alloy. Materials Science & Engineering: A
  Vitenskapelig artikkel

2012

• Fjeldbo, Snorre Kjørstad; Li, Yanjun; Marthinsen, Knut; Furu, Trond. (2012) Through-process sensitivity analysis on the effect of process variables on strength in extruded Al-Mg-Si alloys. Journal of Materials Processing Technology
  Vitenskapelig artikkel
• Fjeldberg, Egil; Marthinsen, Knut. (2012) On the recrystallization kinetics of 3D Potts Monte Carlo simulations. Materials Science Forum
  Vitenskapelig artikkel
• Kolar, Michal; Pedersen, Ketill Olav; Gulbrandsen-Dahl, Sverre; Marthinsen, Knut. (2012) Effect of simultaneous deformation and artificial ageing on the mechanical properties of an Al-Mg-Si alloy. International Journal of Materials Research - Zeitschrift für Metallkunde
  Vitenskapelig artikkel
• Furu, Jørgen; Buchholz, Andreas; Bergstrøm, Trond Harald; Marthinsen, Knut. (2012) Numerical modelling of oxy-fuel burners for aluminium melting. Light Metals
  Vitenskapelig artikkel
• Fjeldberg, Egil; Holm, Elizabeth; Rollett, Anthony David; Marthinsen, Knut. (2012) Mobility driven abnormal grain growth in the presence of particles. Materials Science Forum
  Vitenskapelig artikkel
• Marthinsen, Knut; Friis, Jesper; Holmedal, Bjørn; Skauvik, Inge; Furu, Trond. (2012) Modelling the recrystallization behaviour during industrial processing of aluminium alloys. Materials Science Forum
  Vitenskapelig artikkel
• Westermann, Ida; Haugstad, Ann Leni; Langsrud, Yngve; Marthinsen, Knut. (2012) Effect of quenching rate on microstructure and mechanical properties of commercial AA7108 aluminium alloy. Transactions of Nonferrous Metals Society of China
  Vitenskapelig artikkel
• Westermann, Ida; Hopperstad, Odd Sture; Marthinsen, Knut; Holmedal, Bjørn. (2012) Effect of alloying elements on stage-III work-hardening behaviour of Al-Zn-Mg(-Cu) alloys. International Journal of Materials Research - Zeitschrift für Metallkunde
  Vitenskapelig artikkel
• Gulbrandsen-Dahl, Sverre; Marioara, Calin Daniel; Pedersen, Ketill Olav; Marthinsen, Knut. (2012) Hardening of Al-Mg-Si alloys and effect of particle structure. Materials Science Forum
  Vitenskapelig artikkel
• Kolar, Michal; Teichmann, Katharina; Gulbrandsen-Dahl, Sverre; Pedersen, Ketill Olav; Marthinsen, Knut. (2012) Combined effect of deformation and precipitation on tensile properties of an Al-Mg-Si alloy. Materials Science Forum
  Vitenskapelig artikkel
• Marthinsen, Knut; Fjeldberg, Egil. (2012) On the simulation of recrystallization textures using a 3D Monte Carlo Model. Computer Methods in Materials Science
  Vitenskapelig artikkel
• Teichmann, Katharina; Marthinsen, Knut. (2012) The effect of deformation on precipitation and precipitation hardening in aluminium alloys. Norwegian University of Science and Technology
  Doktorgradsavhandling
• Kolar, Michal; Pedersen, Ketill Olav; Gulbrandsen-Dahl, Sverre; Marthinsen, Knut. (2012) Combined effect of deformation and artificial aging on mechanical properties of Al-Mg-Si Alloy. Transactions of Nonferrous Metals Society of China
  Vitenskapelig artikkel
• Teichmann, Katharina; Marioara, Calin Daniel; Andersen, Sigmund Jarle; Marthinsen, Knut. (2012) The Effect of Preaging Deformation on the Precipitation Behavior of an Al-Mg-Si Alloy. Metallurgical and Materials Transactions A
  Vitenskapelig artikkel
• Wang, Ning; Flatøy, Jarl Erik; Li, Yanjun; Marthinsen, Knut. (2012) Evolution in microstructure and mechanical properties during back-annealing of AlMnFeSi alloy. Transactions of Nonferrous Metals Society of China
  Vitenskapelig artikkel
• Bunkholt, Sindre; Marthinsen, Knut; Nes, Erik Aasmund. (2012) Orientation dependent subgrain growth during isothermal annealing of high-purity aluminium. John Wiley & Sons
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
• Li, Yanjun; Zhang, WZ; Marthinsen, Knut. (2012) Precipitation crystallography of plate-shaped Al-6(Mn,Fe) dispersoids in AA5182 alloy. Acta Materialia
  Vitenskapelig artikkel
• Wang, Ning; Flatøy, Jarl Erik; Li, Yanjun; Marthinsen, Knut. (2012) Evolution in microchemistry and its effects on deformation and annealing behavior of an AlMnFeSi Alloy. John Wiley & Sons
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
• Westermann, Ida; Hopperstad, Odd Sture; Myhr, Ole Runar; Marthinsen, Knut; Holmedal, Bjørn. (2012) Modeling of Work-Hardening in an Age-hardenable AA7108 Aluminum Alloy. John Wiley & Sons
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel

2011

• Sæterli, Ragnhild; Flage-Larsen, Espen; Friis, Jesper; Løvvik, Ole Martin; Pacaud, Jerome; Marthinsen, Knut. (2011) Experimental and theoretical study of electron density and structure factors in CoSb3. Ultramicroscopy
  Vitenskapelig artikkel
• Dumoulin, Stephane; Friis, Jesper; Gouttebroze, Sylvain; Holmedal, Bjørn; Marthinsen, Knut. (2011) 3D Crystal Plasticity Modelling of Complex Microstructures in Extruded Products. AIP Conference Proceedings
  Vitenskapelig artikkel
• Teichmann, Katharina; Marioara, Calin Daniel; Andersen, Sigmund Jarle; Pedersen, Ketill Olav; Gulbrandsen-Dahl, Sverre; Kolar, Michal. (2011) HRTEM study of the effect of deformation on the early precipitation behaviour in an AA6060 Al-Mg-Si alloy. Philosophical Magazine
  Vitenskapelig artikkel
• Westermann, Ida; Snilsberg, Knut Erik; Sharifi, Z; Hopperstad, Odd Sture; Marthinsen, Knut; Holmedal, Bjørn. (2011) Three-Point Bending of Heat-Treatable Aluminum Alloys: Influence of Microstructure and Texture on Bendability and Fracture Behavior. Metallurgical and Materials Transactions A
  Vitenskapelig artikkel
• Kolar, Michal; Pedersen, Ketill Olav; Gulbrandsen-Dahl, Sverre; Teichmann, Katharina; Marthinsen, Knut. (2011) Effect of Pre-Deformation on Mechanical Response of an Artificially Aged Al-Mg-Si Alloy. Materials transactions
  Vitenskapelig artikkel

2010

• Kolar, Michal; Pedersen, Ketill Olav; Gulbrandsen-Dahl, Sverre; Teichmann, Katharina; Marthinsen, Knut. (2010) The Effect of Deformation on the Artificial Aging Response of an Al-Mg-Si Alloy.
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
• Westermann, Ida; Snilsberg, Knut Erik; Holmedal, Bjørn; Hopperstad, Odd Sture; Marthinsen, Knut. (2010) Bendability and Fracture Behaviour of Heat-treatable Extruded Aluminium Alloys.
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
• Jia, Zhihong; Friis, Jesper; Forbord, Børge; Solberg, Jan Ketil; Marthinsen, Knut. (2010) The Effect of Alloying Elements on the Metastable Zr Solid Solubility and Precipitation of L12 Al3Zr Precipitates in Aluminium Alloys.
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
• Teichmann, Katharina; Marioara, Calin D.; Pedersen, Ketill Olav; Gulbrandsen-Dahl, Sverre; Kolar, Michal; Andersen, Sigmund J.. (2010) The effect of deformation on the precipitation behaviour of an A1MgSi alloy. A HRTEM study.
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
• Furu, Jørgen; Buchholz, Andreas; Bergstrøm, Trond H.; Marthinsen, Knut. (2010) Heating and melting of single Al ingots in an aluminium melting furnace. The Minerals, Metals, and Materials Society (TMS)
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
• Furu, Jørgen; Bergstrøm, Trond H.; Marthinsen, Knut. (2010) A comparison of Air-fuel and Low-temperature Oxyfuel Burners for Aluminium Heating and Melting.
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
• Fjeldberg, Egil; Marthinsen, Knut. (2010) A 3D Monte Carlo study of the effect of grain boundary anisotropy and particles on the size distribution of grains after recrystallisation and grain growth. Computational Materials Science
  Vitenskapelig artikkel
• Westermann, Ida; Hopperstad, Odd Sture; Marthinsen, Knut; Holmedal, Bjørn. (2010) Work-hardening behaviour of a heat-treatable AA7108 aluminium alloy deformed to intermediate strains by compression. Journal of Materials Science
  Vitenskapelig artikkel
• Kolar, Michal; Pedersen, Ketill Olav; Gulbrandsen-Dahl, Sverre; Bruggemann, Thiemo; Marthinsen, Knut. (2010) The Effect of Deformation on the Work Hardening Behaviour after Aging of Two Commercial Al-Mg-Si Alloys. Materials Science Forum
  Vitenskapelig artikkel
• Gulbrandsen-Dahl, Sverre; Moen, Knut Erling; Ehlers, Flemming; Marioara, Calin D; Pedersen, Ketill Olav; Marthinsen, Knut. (2010) Matrix Coherency Strain and Hardening of Al-Mg-Si. Materials Science Forum
  Vitenskapelig artikkel
• Marthinsen, Knut; Abtahi, Shahriar; Holmedal, Bjørn; Friis, Jesper; Nes, Erik Aasmund; Furu, Trond. (2010) Modelling the Work Hardening Behaviour of AlMgMn Alloys. Materials Science Forum
  Vitenskapelig artikkel
• Snilsberg, Knut Erik; Westermann, Ida; Holmedal, Bjørn; Hopperstad, Odd Sture; Langsrud, Yngve; Marthinsen, Knut. (2010) Anisotropy of Bending Properties in Industrial Heat-treatable Extruded Aluminium Alloys. Materials Science Forum
  Vitenskapelig artikkel

2009

• Westermann, Ida; Hopperstad, Odd Sture; Marthinsen, Knut; Holmedal, Bjørn. (2009) Ageing and work-hardening behaviour of a commercial AA7108 aluminium alloy. Materials Science & Engineering: A
  Vitenskapelig artikkel
• Sæterli, Ragnhild; Flage-Larsen, E.; Prytz, Ø.; Prytz, Øystein; Taftø, J.; Taftø, Johan. (2009) Electron energy loss spectroscopy of the L2,3 edge of phosphorus skutterudites and electronic structure calculations. Physical Review B. Condensed Matter and Materials Physics
  Vitenskapelig artikkel
• Lefebvre, Williams; Danoix, F; Hallem, Håkon; Forbord, Børge; Bostel, A; Marthinsen, Knut. (2009) Precipitation kinetic of Al3(Sc,Zr) dispersoids in aluminium. Journal of Alloys and Compounds
  Vitenskapelig artikkel
• Westermann, Ida; Hopperstad, Odd Sture; Marthinsen, Knut; Holmedal, Bjørn. (2009) Work- and age-hardening behaviour of a commercial AA7108 aluminium alloy. Materials Science Forum
  Vitenskapelig artikkel

2008

• Forbord, B.; Hallem, Håkon; Røyset, J.; Marthinsen, Knut. (2008) Thermal stability of Al-3(Sc-x,Zr1-x)-dispersoids in extruded aluminium alloys. Materials Science & Engineering: A
  Vitenskapelig artikkel
• Li, Yanjun; Furu, Trond; Dons, Anne Lise; Marthinsen, Knut; Arnberg, Lars. (2008) Factors influencing the precipitation behaviour of Mn-containing dispersoids during homogenization of AA3xxx aluminium alloys. Wiley-VCH
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
• Fjeldberg, Egil; Marthinsen, Knut. (2008) A 3D Monte Carlo study of the effect of anisotropy on the size distribution of recrystallized grains. Wiley-VCH
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
• Fjeldberg, Egil; Marthinsen, Knut. (2008) A 3D Monte Carlo simulation of the texture evolution during recrystallisation of an Al-Mg-Mn alloy. Wiley-VCH
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
• Kolar, Michal; Gulbrandsen-Dahl, Sverre; Pedersen, Ketill Olav; Marthinsen, Knut. (2008) The effect of deformation on the aging response of an Al-Mg-Si alloy. Wiley-VCH
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
• Gulbrandsen-Dahl, Sverre; Pedersen, Ketill Olav; Marioara, Calin Daniel; Kolar, Michal; Marthinsen, Knut. (2008) Mechanical characteristics of Post-β’’ Precipitates in Al-Mg-Si alloys. Wiley-VCH
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel

2007

• Hunderi, Ola; Marthinsen, Knut; Ryum, Nils. (2007) On the validation of the Monte Carlo technique in simulation of grain growth in small, two-dimensional systems. Materials Science Forum
  Vitenskapelig artikkel
• Hallem, Håkon; Forbord, Børge; Marthinsen, Knut. (2007) Development of aluminium alloys with ultimate recrsyatllization resistance. Materials Science Forum
  Vitenskapelig artikkel
• Pettersen, Tanja; Li, Yanjun; Furu, Trond; Marthinsen, Knut. (2007) Effect of changing homogenization treatment on the particle structure in Mn-containing aluminium alloys. Materials Science Forum
  Vitenskapelig artikkel
• Fjeldberg, Egil; Marthinsen, Knut. (2007) Computer simulations of kinetics and texture of recrystallization by a 3-D Potts Monte Carlo model. Materials Science Forum
  Vitenskapelig artikkel
• Miroux, Alexis; Lok, Z.J.; van der Zwaag, Sybrand; Marthinsen, Knut. (2007) Solute and second phase evolution during industrial processing of AA3101. Materials Science Forum
  Vitenskapelig artikkel

2006

• Hallem, Håkon; Rittel, Wouter; Forbord, Børge; Marthinsen, Knut. (2006) Recrystallisation resistance of extruded and cold rolled aluminium alloys with additions of Hf, Sc and Zr. Materials Science Forum
  Vitenskapelig artikkel
• Hallem, Håkon; Lefebvre, Williams; Forbord, Børge; Danoix, Frederic; Marthinsen, Knut. (2006) The formation of Al3(Scx,Zry,Hf1-x-y)-dispersoids in aluminium alloys. Materials Science & Engineering: A
  Vitenskapelig artikkel
• Forbord, Børge; Auran, Lars; Lefebvre, Williams; Hallem, Håkon; Marthinsen, Knut. (2006) Rapid precipitation of dispersoids during extrusion of an Al-0.91 wt.% Mn-0.13 wt.% Zr-0.17 wt.% Sc-alloy. Materials Science & Engineering: A
  Vitenskapelig artikkel
• Hunderi, Ola; Friis, Jesper; Marthinsen, Knut; Ryum, Nils. (2006) Grain size correlation during normal grain growth in one dimension. Scripta Materialia
  Vitenskapelig artikkel
• Morgenstern, Roman; Videm, Marianne; Marthinsen, Knut; Nes, Erik Aasmund; Furu, Trond. (2006) Deformation and recrystallization behaviour of a homogenized and a heterogenized Al-Mg-Si alloy. Materials Science Forum
  Vitenskapelig artikkel
• Friis, Jesper; Holmedal, Bjørn; Ryen, Øyvind; Nes, Erik Aasmund; Myhr, Ole Runar; Grong, Øystein. (2006) Work hardening behaviour of heat-treatable Al-Mg-Si-alloys. Materials Science Forum
  Vitenskapelig artikkel
• Hirsch, J; Holmedal, Bjørn; Nes, Erik Aasmund; Marthinsen, Knut; Engler, Olaf; Abtahi, Shahriar. (2006) Virtual Fabrication of Aluminium Products. John Wiley & Sons John Wiley & Sons
  Fagbok
• Marthinsen, Knut; Abtahi, Shahriar; Holmedal, Bjørn; Nes, Erik Aasmund; Johansen, Arve; Furu, Trond. (2006) Through Process Simulation of EN AW-3103 Sheet Production Modelling the Evolution of Microstructure, Texture, Microchemistry and Mechanical Properties. John Wiley & Sons
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
• Furu, Trond; Dons, Anne Lise; Berstad, Torodd; Holmedal, Bjørn; Marthinsen, Knut. (2006) Through Process Modeling of Extrusion: Evolution in Microstructure and Mechanical Properties through the whole Process Chain from As Cast and Homogenized Condition to Forming of Profiles. John Wiley & Sons
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
• Holmedal, Bjørn; Nes, Erik Aasmund; Marthinsen, Knut. (2006) Work Hardening of Aluminium Alloys - A Review of Selected Work Hardening Models. John Wiley & Sons
  Vitenskapelig Kapittel/Artikkel/Konferanseartikkel

2005

• Holmedal, Bjørn; Marthinsen, Knut; Nes, Erik Aasmund. (2005) A unified microstructural metal plasticity model applied for testing, processing and forming of aluminium alloys. Zeitschrift für Metallkunde
  Vitenskapelig artikkel
• Nes, Erik Aasmund; Holmedal, Bjørn; Evangelista, E.; Marthinsen, Knut. (2005) Modelling grain boundary strengthening in ultra-fine grained aluminum alloys. Materials Science & Engineering: A
  Vitenskapelig artikkel
• Friis, Jesper; Jiang, Bin; Marthinsen, Knut; Holmestad, Randi. (2005) A study of charge density in copper. Acta Crystallographica Section A: Foundations of Crystallography
  Vitenskapelig artikkel
• Hallem, Håkon; Marthinsen, Knut; Forbord, Børge; Reiso, Oddvin. (2005) Precipitation behaviour and recrystallization resistance in aluminium alloys with additions of hafnium, scandium and zirconium. Norwegian University of Science and Technology
  Doktorgradsavhandling

2004

• Forbord, Børge; Hallem, Håkon; Marthinsen, Knut. (2004) The influence of precipitation annealing procedure on the recrystallisation resistance of Al-Mn-Zr alloys with and without Sc. Proceedings / The 9th international conference on aluminium alloys
  Vitenskapelig artikkel
• Forbord, Børge; Hallem, Håkon; Marthinsen, Knut. (2004) The effect of alloying elements on Precipitation and Recrystallization in Al-Zr Alloys. Proceedings / The 9th international conference on aluminium alloys
  Vitenskapelig artikkel
• Marthinsen, Knut; Abtahi, Shahriar; Sjølstad, Knut; Nes, Erik Aasmund. (2004) Modelling the microstructural evolution during hot rolling and subsequent cold rolling and annealing of an AA3103 alloy. Proceedings / The 9th international conference on aluminium alloys
  Vitenskapelig artikkel
• Sjølstad, Knut; Engler, Olaf; Marthinsen, Knut; Nes, Erik Aasmund. (2004) The effect of concurrent precipitation on the recrystallization texture of an AlMn-alloy. Proceedings / The 9th international conference on aluminium alloys
  Vitenskapelig artikkel
• Sjølstad, Knut; Marthinsen, Knut; Nes, Erik Aasmund. (2004) Modelling the softening behaviour of commercial AlMn-alloys. Materials Science Forum
  Vitenskapelig artikkel
• Forbord, Børge; Hallem, Håkon; Marthinsen, Knut. (2004) The effect of Sc on the extrudability and recrystallisation resistance Al-Mn-Zr-alloys. Materials Science Forum
  Vitenskapelig artikkel
• Forbord, Børge; Lefebvre, Williams; Danoix, F; Hallem, Håkon; Marthinsen, Knut. (2004) Three Dimensional Atom Probe investigation of the formation of Al3(Sc,Zr)-dispersoids in aluminium alloys. Scripta Materialia
  Vitenskapelig artikkel
• Hallem, Håkon; Forbord, Børge; Marthinsen, Knut. (2004) An investigation of cast structures in Al-Hf-(Sc)-(Zr) alloys and their subsequent effect on recrystallisation resistance after cold rolling. Proceedings / The 9th international conference on aluminium alloys
  Vitenskapelig artikkel
• Hallem, Håkon; Forbord, Børge; Marthinsen, Knut. (2004) Investigation of Al-Fe-Si Alloys with additions of Hf, Sc and Zr. Proceedings / The 9th international conference on aluminium alloys
  Vitenskapelig artikkel
• Friis, Jesper; Jiang, Bin; Marthinsen, Knut; Holmestad, Randi. (2004) QCBED measurements in strontium titanate. Proceedings / European Microscopy Congress
  Vitenskapelig artikkel
• Nes, Erik Aasmund; Marthinsen, Knut; Holmedal, Bjørn. (2004) The effect of boundary spacing on substructure strengthening. Materials Science and Technology
  Vitenskapelig artikkel
• Hallem, Håkon; Forbord, Børge; Marthinsen, Knut. (2004) An investigation of Dilute Al-Hf and Al-Hf-Si Alloys. Materials Science & Engineering: A
  Vitenskapelig artikkel
• Forbord, Børge; Hallem, Håkon; Ryum, Nils; Marthinsen, Knut. (2004) Precipitation and recrystallization in Al-Mn-Zr with and without Sc. Materials Science & Engineering: A
  Vitenskapelig artikkel
• Friis, Jesper; Marthinsen, Knut; Holmestad, Randi. (2004) Retrieval of anisotropic displacement parameters in Mg from convergent beam electron diffraction experiments. Institute of Physics Conference Series
  Vitenskapelig artikkel
• Marthinsen, Knut; Abtahi, Shahriar; Sjølstad, Knut; Holmedal, Bjørn; Nes, Erik Aasmund; Johansen, Arve. (2004) Modelling the evolution of microstructure and mechanical properties during processing of AA3103. Aluminium
  Vitenskapelig artikkel
• Holmedal, Bjørn; Evangelista, E.; Marthinsen, Knut; Nes, Erik Aasmund. (2004) Modelling grain boundary strengthening in aluminium alloys. Proceedings of the Risø International Symposium on Materials Science
  Vitenskapelig artikkel
• Furu, Trond; Johansen, Arve; Sæter, Jan Anders; Dons, Anne Lise; Pedersen, Ketill Olav; Berstad, Torodd. (2004) Through process modeling of extrusion: Evolution in microstructure and mechanical properties through the hole process chain from as cast and homogenized condition to forming of profiles. Aluminium
  Vitenskapelig artikkel
• Friis, Jesper; Jiang, Bin; Spence, John C. H.; Marthinsen, Knut; Holmestad, Randi. (2004) Extinction-free electron diffraction refinement of bonding in SrTiO3. Acta Crystallographica Section A: Foundations of Crystallography
  Vitenskapelig artikkel

2003

• Friis, Jesper; Madsen, Georg; Larsen, Finn krebs; Jiang, Bin; Marthinsen, Knut; Holmestad, Randi. (2003) Magnesium: Comparison of density functional theory calculations with electron and x-ray diffraction experiments. Journal of Chemical Physics
  Vitenskapelig artikkel
• Marthinsen, Knut; Daaland, O; Furu, T; Nes, Erik Aasmund. (2003) The spatial distribution of nucleation sites and its effect on recrystallization kinetics in commercial aluminum alloys. Metallurgical and Materials Transactions A
  Vitenskapelig artikkel
• Marthinsen, Knut; Holmedal, Bjørn; Abtahi, Shahriar; Valle, Randulf; Chen, Shang Ping; Nes, Erik Aasmund. (2003) Coupled FEM and Microstructure Modeling applied to Rolling and Extrusion of Aluminium Alloys. Materials Science Forum
  Vitenskapelig artikkel
• Marthinsen, Knut; Nes, Erik Aasmund; Furu, Trond; Daaland, Ole. (2003) The Spatial Distribution of Nucleation Sites and its Effect on Recrystallization Kinetics in Commercial Aluminium Alloys. Metallurgical and Materials Transactions A
  Vitenskapelig artikkel
• Frøseth, Anders Gudmund; Holmestad, Randi; Derlet, Peter; Marthinsen, Knut. (2003) Improved tight binding parametrization for the simulation of stacking faults in Aluminium. Physical Review B. Condensed Matter and Materials Physics
  Vitenskapelig artikkel
• Friis, Jesper; Holmestad, Randi; Marthinsen, Knut. (2003) Quantitative Convergent Beam Electron Diffraction and Charge Density Studies. NTNU
  Doktorgradsavhandling

2002

• Holmedal, Bjørn; Abtahi, Shahriar; Marthinsen, Knut; Nes, Erik Aasmund. (2002) Modelling the evolution in microstructure and properties during deformation of Aluminium. Materials Science Forum
  Vitenskapelig artikkel
• Marthinsen, Knut; Abtahi, Shahriar; Holmedal, Bjørn; Nes, Erik Aasmund. (2002) A through process modelling approach to the modelling of extrusion. Aluminium
  Vitenskapelig artikkel
• Nes, Erik Aasmund; Marthinsen, Knut; Brechet, Yves. (2002) On the mechanisms of dynamic recovery. Scripta Materialia
  Vitenskapelig artikkel
• Nes, Erik Aasmund; Marthinsen, Knut. (2002) Modelling the evolution in microstructure and properties during plastic deformation of FCC-metals and alloys - An approach to a unified model. Materials Science and Engineering
  Vitenskapelig artikkel

2001

• Marthinsen, Knut; Nes, Erik Aasmund. (2001) Modelling strain hardening and steady state defromation of Al-Mg alloys. Materials Science and Technology
  Vitenskapelig artikkel
• Nes, Erik Aasmund; Marthinsen, Knut; Rønning, Bjørn. (2001) Modelling the evolution in microstructure and properties during processing of aluminium alloys. Journal of Materials Processing Technology
  Vitenskapelig artikkel

2000

• Nes, Erik Aasmund; Pettersen, Tanja; Marthinsen, Knut. (2000) On the mechanisms of work hardening and flow-stress saturation. Scripta Materialia
  Vitenskapelig artikkel

1999

• Høier, Rangvald; Birkeland, Christophe; Holmestad, Randi; Marthinsen, Knut. (1999) Three-phase structure invariants and structure factors determined with the quantitative convergent-beam electron diffraction method. Acta Crystallographica Section A: Foundations of Crystallography
  Vitenskapelig artikkel
• Holmestad, Randi; Birkeland, Christophe; Marthinsen, Knut; Høier, Rangvald; Zuo, Jian Min. (1999) Use of quantitative convergent-beam electron diffraction in materials science. Microscopy research and technique (Print)
  Vitenskapelig artikkel
• Derlet, Peter; Høier, Rangvald; Holmestad, Randi; Marthinsen, Knut; Ryum, Nils. (1999) The embedded-atom model applied to vacancy formation in bulk aluminium and lithium. Journal of Physics: Condensed Matter
  Vitenskapelig artikkel

1998

• Marthinsen, Knut; Fridy, J.; Rouns, T.N.; Lippert, K.B.; Nes, Erik Aasmund. (1998) Characterization of 3-D particle distributions and effects on recrystallization kinetics and microstructure. Scripta Materialia
  Vitenskapelig artikkel
• Birkeland, Christophe; Holmestad, Randi; Marthinsen, Knut; Høier, Rangvald. (1998) Use of supercomputers in quantitative electron diffraction. Journal of Scientific Computing
  Vitenskapelig artikkel
• Lie, Knut; Holmestad, Randi; Marthinsen, Knut; Høier, Rangvald. (1998) Experimental and theoretical investigations of EELS near-edge fine structure in TiAl with and without ternary addition of V, Cr, or Mn. Physical Review B. Condensed Matter and Materials Physics
  Vitenskapelig artikkel

1997

• Birkeland, Christophe R.; Holmestad, Randi; Marthinsen, Knut; Høier, Rangvald. (1997) Efficient beam-selection criteria in quantitative convergent beam electron diffraction. Ultramicroscopy
  Vitenskapelig artikkel
• Marthinsen, Knut; Ryum, Nils. (1997) Transformation kinetics and microstructure for grain boundary nucleated recrystallization in two dimensions. Acta Materialia
  Vitenskapelig artikkel
• Marthinsen, Knut; Lindheim, Thomas; Høier, Rangvald. (1997) Non-centrosymmetry effects and polarity determination in III-V semiconductors. Acta Crystallographica Section A: Foundations of Crystallography
  Vitenskapelig artikkel

1996

• Vatne, Hans Erik; Marthinsen, Knut; Ørsund, Roar; Nes, Erik Aasmund. (1996) Modeling recrystallization kinetics, grain sizes, and textures during multipass hot rolling. Metallurgical and Materials Transactions A
  Vitenskapelig artikkel
• Marthinsen, Knut; Hunderi, Ola; Ryum, Nils. (1996) The influence of spatial grain size correlation and topology on normal grain growth in two dimensions. Acta Materialia
  Vitenskapelig artikkel