Arild Holm Clausen
Om
BAKGRUNN:
Arild Holm Clausen ble uteksaminert som sivilingeniør fra Institutt for konstruksjonsteknikk ved Bygningsingeniøravdelingen ved daværende NTH i 1991. Han ble dr.ing i 1999. Siden 2003 har Clausen vært førsteamanuensis ved Institutt for konstruksjonsteknikk, og fra 2007 professor.
FORSKNING:
Arild Holm Clausen er involvert i forskningsgruppa SIMLab (Structural Impact Laboratory). Dette var ett av 14 Senter for forskningsbasert innovasjon (SFI), oppnevnt av Norges forskningsråd for perioden 2007-2014. Gruppa var deretter vert for SFI CASA (Centre for Advanced Structural Analysis) i 2015-2023. Forskningsgruppa SIMLab arbeider med materialer og komponenter utsatt for dynamisk last. Aktuelle materialer er primært metaller og polymerer. SIMLab disponerer et velutstyrt laboratorium. Samspillet mellom eksperimentelle undersøkelser og numeriske simuleringer er hovedplattformen i forskningen ved SIMLab. Clausen har primært arbeidet med modellering av polymerer, høyhastighets materialtesting og stålkonstruksjoner.
UNDERVISNING:
Clausen har undervisningserfaring i
- Mekanikk 1, 2, 3
- Stålkonstruksjoner 1
- Bygningsmaterialer
- Elementmetoden
ADMINISTRATIVT:
Clausen har vært nestleder ved Institutt for konstruksjonsteknikk siden 2016. Ansvarsområdet er utdanningsvirksomheten ved instituttet.
Oppdatert september 2023
Publikasjoner
2024
-
Aune, Sigurd;
Morin, David Didier;
Langseth, Magnus;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2024)
Modelling of welded aluminium connections in large-scale analyses.
Thin-walled structures
Vitenskapelig artikkel
-
Aune, Sigurd;
Morin, David Didier;
Langseth, Magnus;
Clausen, Arild Holm.
(2024)
Experimental and numerical study on the tensile ductility of an aluminium alloy with heat-affected zones.
European Journal of Mechanics. A, Solids
Vitenskapelig artikkel
-
Obkircher, Debora;
Costas, Miguel;
Langseth, Magnus;
Clausen, Arild Holm.
(2024)
Quasi-static and dynamic shear-out resistance in a steel fin-plate connection: An experimental and numerical investigation.
International Journal of Impact Engineering
Vitenskapelig artikkel
2023
-
Sælen, Ruben Løland;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2023)
Mechanical behaviour and constitutive modelling of an additively manufactured stereolithography polymer.
Mechanics of materials (Print)
Vitenskapelig artikkel
2022
-
Hund, Jonas;
Granum, Henrik Møgster;
Olufsen, Sindre Nordmark;
Holmström, Petter Henrik;
Johnsen, Joakim;
Clausen, Arild Holm.
(2022)
Impact of stress triaxiality, strain rate, and temperature on the mechanical response and morphology of PVDF.
Polymer testing
Vitenskapelig artikkel
2021
-
Sønstabø, Johan Kolstø;
Faksvåg, Kristian Ullern;
Jakobsen, Lars;
Clausen, Arild Holm.
(2021)
Modelling of Stainless Steel AISI 316L in Finite Element Simulations.
ce/papers - Proceedings in Civil Engineering
Vitenskapelig artikkel
-
Holmström, Petter Henrik;
Clausen, Arild Holm;
Berstad, Torodd;
Morin, David;
Hopperstad, Odd Sture.
(2021)
A pragmatic orthotropic elasticity-based damage model with spatially distributed properties applied to short glass-fibre reinforced polymers.
International Journal of Solids and Structures
Vitenskapelig artikkel
-
Johannessen, Håkon;
Johannessen, Oddvar Hestetræet;
Costas, Miguel;
Clausen, Arild Holm;
Sønstabø, Johan Kolstø.
(2021)
Experimental and numerical study of notched SHS made of different S355 steels.
Journal of constructional steel research
Vitenskapelig artikkel
-
Olufsen, Sindre Nordmark;
Nygård, Per;
Ines Teixeira Pais, Catarina;
Perillo, Giovanni;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2021)
Influence of loading conditions on the tensile response of degraded polyamide 11.
Polymer
Vitenskapelig artikkel
2020
-
Olufsen, Sindre Nordmark;
Clausen, Arild Holm;
Breiby, Dag Werner;
Hopperstad, Odd Sture.
(2020)
X-ray computed tomography investigation of dilation of mineral-filled PVC under monotonic loading.
Mechanics of materials (Print)
Vitenskapelig artikkel
-
Holmström, Petter Henrik;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2020)
Anisotropic tensile behaviour of short glass-fibre reinforced polyamide-6.
Composites Part C: Open Access
Vitenskapelig artikkel
-
Morton, Daniel Thor;
Reyes, Aase Gavina Roberg;
Clausen, Arild Holm;
Hopperstad, Odd Sture.
(2020)
Mechanical response of low density expanded polypropylene foams in compression and tension at different loading rates and temperatures.
Materials Today Communications
Vitenskapelig artikkel
-
Lund, Ådne;
Manoleas, Panagiotis;
Langseth, Magnus;
Clausen, Arild Holm.
(2020)
Sveiste knutepunkt mellom kaldformede hulprofiler.
Nyheter om stålbyggnad
Populærvitenskapelig artikkel
-
Olufsen, Sindre Nordmark;
Tekseth, Kim Robert Bjørk;
Breiby, Dag Werner;
Clausen, Arild Holm;
Hopperstad, Odd Sture.
(2020)
A technique for in situ X-ray computed tomography of deformation-induced cavitation in thermoplastics.
Polymer testing
Vitenskapelig artikkel
2019
-
Clausen, Arild Holm;
Hopperstad, Odd Sture.
(2019)
Volumetric strain measurement of polymeric materials subjected to uniaxial tension.
Strain
Vitenskapelig artikkel
-
Olufsen, Sindre Nordmark;
Clausen, Arild Holm;
Hopperstad, Odd Sture.
(2019)
Influence of stress triaxiality and strain rate on stress-strain behaviour and dilation of mineral-filled PVC.
Polymer testing
Vitenskapelig artikkel
-
Berntsen, John Fredrick;
Morin, David;
Clausen, Arild Holm;
Langseth, Magnus.
(2019)
Experimental investigation and numerical modelling of the mechanical response of a semi-structural polyurethane adhesive.
International Journal of Adhesion and Adhesives
Vitenskapelig artikkel
-
Andersen, Marius Endre;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2019)
Volumetric strain measurement of polymeric materials subjected to uniaxial tension.
Strain
Vitenskapelig artikkel
-
Holmstrøm, Petter Henrik;
Clausen, Arild Holm;
Hopperstad, Odd Sture.
(2019)
An experimental and numerical study of the mechanical behaviour of short glass-fibre reinforced thermoplastics.
Norwegian University of Science and Technology
Doktorgradsavhandling
-
Johnsen, Joakim;
Clausen, Arild Holm;
Grytten, Frode;
Benallal, Ahmed;
Hopperstad, Odd Sture.
(2019)
A thermo-elasto-viscoplastic constitutive model for polymers.
Journal of the Mechanics and Physics of Solids
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Hopperstad, Odd Sture.
(2019)
Volumetric strain measurement of polymeric materials subjected to uniaxial tension.
Strain
Vitenskapelig artikkel
2018
-
Clausen, Arild Holm.
(2018)
Stålmaterialer - Kompendium i TKT4240 BM1 Bygningsmaterialer.
Institutt for konstruksjonsteknikk, NTNU
Kompendium
-
Clausen, Arild Holm.
(2018)
Tensile Testing Using the Kolsky-Hopkinson Bar Machine.
Springer
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
2017
-
Grimsmo, Erik Løhre;
Aalberg, Arne;
Langseth, Magnus;
Clausen, Arild Holm.
(2017)
How placement of nut determines failure mode of bolt-and-nut assemblies.
Steel Construction
Vitenskapelig artikkel
-
Grimsmo, Erik Løhre;
Dæhli, Lars Edvard;
Hopperstad, Odd Sture;
Aalberg, Arne;
Langseth, Magnus;
Clausen, Arild Holm.
(2017)
Numerical study of fillet welds subjected to quasi-static and impact loading
.
International Journal of Mechanical Sciences
Vitenskapelig artikkel
-
Johnsen, Joakim;
Grytten, Frode;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2017)
Influence of strain rate and temperature on the mechanical behaviour of rubber-modified polypropylene and cross-linked polyethylene.
Mechanics of materials (Print)
Vitenskapelig artikkel
-
Ilseng, Arne;
Skallerud, Bjørn Helge;
Clausen, Arild Holm.
(2017)
Volume growth during uniaxial tension of particle-filled elastomers at various temperatures–Experiments and modelling.
Journal of the Mechanics and Physics of Solids
Vitenskapelig artikkel
-
Ilseng, Arne;
Skallerud, Bjørn Helge;
Clausen, Arild Holm.
(2017)
An experimental and numerical study on the volume change of particle-filled elastomers in various loading modes.
Mechanics of materials (Print)
Vitenskapelig artikkel
-
Johnsen, Joakim;
Clausen, Arild Holm;
Grytten, Frode;
Hopperstad, Odd Sture.
(2017)
Thermomechanical behaviour of semi-crystalline polymers: experiments, modelling and simulation.
Norges teknisk-naturvitenskapelige universitet
Norges teknisk-naturvitenskapelige universitet
Doktorgradsavhandling
-
Børvik, Tore;
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus;
Reyes, Aase Gavina Roberg.
(2017)
Preface.
Procedia Engineering
Leder
-
Grimsmo, Erik Løhre;
Dæhli, Lars Edvard;
Hopperstad, Odd Sture;
Aalberg, Arne;
Langseth, Magnus;
Clausen, Arild Holm.
(2017)
Comparison of damage models in numerical simulations of fillet welds under quasi-static and impact loading.
Procedia Engineering
Vitenskapelig artikkel
-
Grimsmo, Erik Løhre;
Clausen, Arild Holm;
Aalberg, Arne;
Langseth, Magnus.
(2017)
Fillet welds subjected to impact loading – an experimental study.
International Journal of Impact Engineering
Vitenskapelig artikkel
2016
-
Helbig, Martin;
Van Der Giessen, Erik;
Clausen, Arild Holm;
Seelig, Thomas.
(2016)
Continuum-micromechanical modeling of distributed crazing in rubber-toughened polymers.
European Journal of Mechanics. A, Solids
Vitenskapelig artikkel
-
Ilseng, Arne;
Skallerud, Bjørn Helge;
Clausen, Arild Holm.
(2016)
Tension behaviour of HNBR and FKM elastomers for a wide range of temperatures.
Polymer testing
Vitenskapelig artikkel
-
Ilseng, Arne;
Skallerud, Bjørn Helge;
Clausen, Arild Holm.
(2016)
Mechanical behaviour of particle-filled elastomers at various temperatures - An experimental and numerical study.
NTNU
Doktorgradsavhandling
-
Grimsmo, Erik Løhre;
Clausen, Arild Holm;
Aalberg, Arne;
Langseth, Magnus.
(2016)
A numerical study of beam-to-column joints subjected to impact.
Engineering structures
Vitenskapelig artikkel
-
Johnsen, Joakim;
Grytten, Frode;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2016)
Experimental set-up for determination of the large-strain tensile behaviour of polymers at low temperatures.
Polymer testing
Vitenskapelig artikkel
-
Grimsmo, Erik Løhre;
Aalberg, Arne;
Langseth, Magnus;
Clausen, Arild Holm.
(2016)
Failure modes of bolt and nut assemblies under tensile loading.
Journal of constructional steel research
Vitenskapelig artikkel
-
Vilamosa, Vincent;
Clausen, Arild Holm;
Børvik, Tore;
Holmedal, Bjørn;
Hopperstad, Odd Sture.
(2016)
A physically-based constitutive model applied to AA6082 aluminium alloy at large strains, high strain rates and elevated temperatures.
Materials & design
Vitenskapelig artikkel
2015
-
Vilamosa, Vincent;
Børvik, Tore;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2015)
Behaviour and modelling of aluminium alloy AA6060 subjected to a wide range of strain rates and temperatures.
The European Physical Journal Conferences
Vitenskapelig artikkel
-
Vilamosa, Vincent;
Clausen, Arild Holm;
Børvik, Tore;
Skjervold, SR;
Hopperstad, Odd Sture.
(2015)
Behaviour of Al-Mg-Si alloys at a wide range of temperatures and strain rates.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Grimsmo, Erik Løhre;
Clausen, Arild Holm;
Aalberg, Arne;
Langseth, Magnus.
(2015)
Beam-to-column joints subjected to impact loading.
Tampere University of Technology
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Vilamosa, Vincent;
Børvik, Tore;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2015)
Behaviour and modelling of aluminium alloy AA6060 subjected to a wide range of strain rates and temperatures.
EDP Sciences
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Ilseng, Arne;
Skallerud, Bjørn Helge;
Clausen, Arild Holm.
(2015)
Case study of elastomer seals using FEM.
International Center for Numerical Methods in Engineering (CIMNE)
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Grimsmo, Erik Løhre;
Clausen, Arild Holm;
Langseth, Magnus;
Aalberg, Arne.
(2015)
An experimental study of static and dynamic behaviour of bolted end-plate joints of steel.
International Journal of Impact Engineering
Vitenskapelig artikkel
2014
-
Vilamosa, Vincent;
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Børvik, Tore;
Skjervold, Svein Roger.
(2014)
Influence of temperature and strain rate on the mechanical behaviour of aluminium alloy AA6060.
Materials Science Forum
Vitenskapelig artikkel
-
Ognedal, Anne Serine;
Clausen, Arild Holm;
Berstad, Torodd;
Seelig, Thomas;
Hopperstad, Odd Sture.
(2014)
Void nucleation and growth in mineral-filled PVC - An experimental and numerical study.
International Journal of Solids and Structures
Vitenskapelig artikkel
-
Ognedal, Anne Serine;
Clausen, Arild Holm;
Dahlen, Anfrid;
Hopperstad, Odd Sture.
(2014)
Behavior of PVC and HDPE under highly triaxial stress states: An experimental and numerical study.
Mechanics of materials (Print)
Vitenskapelig artikkel
-
Vilamosa, Vincent;
Clausen, Arild Holm;
Fagerholt, Egil;
Hopperstad, Odd Sture;
Børvik, Tore.
(2014)
Local measurement of stress-strain behaviour of ductile materials at elevated temperatures in a split-hopkinson tension bar system.
Strain
Vitenskapelig artikkel
2012
-
Ognedal, Anne Serine;
Clausen, Arild Holm;
Polanco-Loria, Mario A.;
Benallal, Ahmed;
raka, bumedijen;
Hopperstad, Odd Sture.
(2012)
Experimental and numerical study on the behaviour of PVC and HDPE in biaxial tension.
Mechanics of materials (Print)
Vitenskapelig artikkel
2011
-
Delhaye, Virgile Roger;
Clausen, Arild Holm;
Moussy, F;
Othman, R;
Hopperstad, Odd Sture.
(2011)
Influence of stress state and strain rate on the behaviour of a rubber-particle reinforced polypropylene.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Chen, Yan;
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2011)
Application of a split-Hopkinson tension bar in a mutual assessment of experimental tests and numerical predictions.
International Journal of Impact Engineering
Vitenskapelig artikkel
2010
-
Ognedal, Anne Serine;
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Polanco-Loria, Mario;
Benallal, Ahmed;
raka, bumedijen.
(2010)
Experimental and numerical study on the behaviour of PVC and HDPE in biaxial tension.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Clausen, Arild Holm;
Hovden, Martin Thuve;
Polanco-Loria, Mario;
Berstad, Torodd;
Hopperstad, Odd Sture.
(2010)
Constitutive nodel for thermoplastics - calibration and validation.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Delhaye, Virgile Roger;
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Moussy, Francois;
Othman, Ramzi;
nesa, daniel.
(2010)
Behaviour and modelling of a rubber-modified polypropylene.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Børvik, Tore;
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2010)
SPECIAL ISSUE: IMPACT LOADING OF LIGHTWEIGHT STRUCTURES Preface.
International Journal of Impact Engineering
Leder
-
Delhaye, Virgile Roger;
Clausen, Arild Holm;
Moussy, F;
Hopperstad, Odd Sture;
Othman, R.
(2010)
Mechanical response and microstructure investigation of a mineral and rubber modified polypropylene.
Polymer testing
Vitenskapelig artikkel
-
Polanco-Loria, Mario A.;
Clausen, Arild Holm;
Berstad, Torodd;
Hopperstad, Odd Sture.
(2010)
Constitutive model for thermoplastics with structural applications.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Moura, Rafael Traldi;
Clausen, Arild Holm;
Fagerholt, Egil;
Alves, Marcilio;
Langseth, Magnus.
(2010)
Impact on HDPE and PVC plates - Experimental tests and numerical simulations.
International Journal of Impact Engineering
Vitenskapelig artikkel
2009
-
Tarigopula, Venkatapathi;
Hopperstad, Odd Sture;
Langseth, Magnus;
Clausen, Arild Holm.
(2009)
An evaluation of a combined isotropic-kinematic hardening model for representation of complex strain-path changes in dual-phase steel.
European Journal of Mechanics. A, Solids
Vitenskapelig artikkel
-
Børvik, Tore;
Dey, Sumita;
Clausen, Arild Holm.
(2009)
Perforation resistance of five different high-strength steel plates subjected to small-arms projectiles.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Clausen, Arild Holm.
(2009)
Behaviour and modelling of polymers. Workshop. Trondheim, Norway, 10-11 June 2009.
Digitale læremidler
-
Polanco-Loria, Mario;
Clausen, Arild Holm;
Berstad, Torodd;
Hopperstad, Odd Sture.
(2009)
A Constitutive Model for Thermoplastics Intended for Structural Applications.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Tarigopula, Venkatapathi;
Hopperstad, Odd Sture;
Langseth, Magnus;
Clausen, Arild Holm.
(2009)
Behaviour and Modelling of Dual-Phase Steels.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Tarigopula, Venkatapathi;
Hopperstad, Odd Sture;
Clausen, Arild Holm;
Langseth, Magnus.
(2009)
Effect of pre-straining on localisation and fracture of dual-phase steel at elevated rates of strain.
EDP Sciences
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Moura, Rafael Traldi;
Clausen, Arild Holm;
Langseth, Magnus;
Alves, Marcilio.
(2009)
Dynamic mechanical behaviour of polyethylene.
EDP Sciences
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Tarigopula, Venkatapathi;
Albertini, Carlo;
Langseth, Magnus;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2009)
A hydro-pneumatic machine for intermediate strain-rates: Set-up, tests and numerical simulations.
EDP Sciences
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Clausen, Arild Holm;
Polanco-Loria, Mario A.;
Moura, Rafael Traldi;
Alves, Marcilio;
Berstad, Torodd;
Langseth, Magnus.
(2009)
Polymer plates subjected to impact: Experimental tests and numerical simulations.
EDP Sciences
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Chen, Yan;
Hopperstad, Odd Sture;
Clausen, Arild Holm;
Børvik, Tore;
Berstad, Torodd.
(2009)
Finite element analyses of Charpy tests on extruded aluminium alloys.
EDP Sciences
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Chen, Yan;
Pedersen, Ketill Olav;
Clausen, Arild Holm;
Hopperstad, Odd Sture.
(2009)
An experimental study on the dynamic fracture of extruded AA6xxx and AA7xxx aluminium alloys.
Materials Science & Engineering: A
Vitenskapelig artikkel
-
Chen, Yan;
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2009)
Stress-strain behaviour of aluminium alloys at a wide range of strain rates.
International Journal of Solids and Structures
Vitenskapelig artikkel
2008
-
Clausen, Arild Holm;
Langseth, Magnus.
(2008)
Impact Loading of Lightweight Structures.
Structural Impact Laboratory (SIMLab), Centre for Research-based Innovation, NTNU
Vitenskapelig antologi/Konferanseserie
-
Tarigopula, Venkatapathi;
Hopperstad, Odd Sture;
Langseth, Magnus;
Clausen, Arild Holm.
(2008)
Elastic-plastic behaviour of dual-phase, high-strength steel under strain-path changes.
European Journal of Mechanics. A, Solids
Vitenskapelig artikkel
-
Polanco-Loria, Mario;
Clausen, Arild Holm;
Berstad, Torodd;
Hopperstad, Odd Sture.
(2008)
A modified Boyce-Raghava model for constitutive modelling of thermoplastics.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Polanco-Loria, Mario;
Clausen, Arild Holm;
Berstad, Torodd;
Hopperstad, Odd Sture.
(2008)
A Constitutive Model for Thermoplastics in Structural Applications.
Annet
-
Tarigopula, Venkatapathi;
Langseth, Magnus;
Hopperstad, Odd Sture;
Clausen, Arild Holm;
Hild, Francois.
(2008)
Characterization of localization and large plastic deformations in dual-phase steel using digital image correlation.
Annet
-
Tarigopula, Venkatapathi;
Hopperstad, Odd Sture;
Langseth, Magnus;
Clausen, Arild Holm.
(2008)
Numerical Modelling of the Mechanical Behaviour of Dual-Phase Steels.
Annet
-
Tarigopula, Venkatapathi;
Hopperstad, Odd Sture;
Langseth, Magnus;
Clausen, Arild Holm;
Hild, Francois.
(2008)
A study of localisation in dual-phase high-strength steels under dynamic loading using digital image correlation and FE analysis.
International Journal of Solids and Structures
Vitenskapelig artikkel
-
Tarigopula, Venkatapathi;
Hopperstad, Odd Sture;
Langseth, Magnus;
Clausen, Arild Holm;
Hild, F;
Lademo, Odd-Geir.
(2008)
A study of large plastic deformations in dual phase steel using digital image correlation and FE analysis.
Experimental mechanics
Vitenskapelig artikkel
2007
-
Chen, Yan;
Hopperstad, Odd Sture;
Lademo, Odd-Geir;
Clausen, Arild Holm;
Berstad, Torodd;
Langseth, Magnus.
(2007)
Preliminary simulations of the instrumented Charpy V-notch impact test.
Tapir Akademisk Forlag
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Tarigopula, Venkatapathi;
Hopperstad, Odd Sture;
Clausen, Arild Holm;
Langseth, Magnus.
(2007)
Effect of pre-straining on the dynamic mechanical behaviour of dual-phase high-strength steel alloys.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Chen, Yan;
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2007)
Behaviour of aluminium alloys under elevated rates of strain.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
2006
-
Tarigopula, Venkatapathi;
Langseth, Magnus;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2006)
Axial crushing of thin-walled high-strength steel sections.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Børvik, Tore;
Dey, Sumita;
Clausen, Arild Holm.
(2006)
A preliminary study on the perforation resistance of high-strength steel plates.
Journal de Physique IV : Colloque
Vitenskapelig artikkel
-
Venkatapathi, Tarigopula;
Langseth, Magnus;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2006)
Axial crushing of thin-walled high-strength steel sections.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Auestad, Trond;
Berstad, T;
Børvik, Tore;
Langseth, Magnus.
(2006)
High-temperature tests on aluminium in a split-Hopkinson bar - Experimental set-up and numerical predictions.
Journal de Physique IV : Colloque
Vitenskapelig artikkel
-
Berstad, Torodd;
Hopperstad, Odd Sture;
Clausen, Arild Holm;
Ilstad, Håvar;
Melve, Bjørn.
(2006)
Implementation of Constitutive Model for Thermoplastics with some Preliminary Results.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Benallal, Ahmed;
Berstad, Torodd;
Børvik, Tore;
Clausen, Arild Holm;
Hopperstad, Odd Sture.
(2006)
Dynamic strain aging and related instabilities: experimental, theoretical and numerical aspects.
European Journal of Mechanics. A, Solids
Vitenskapelig artikkel
2005
-
Hopperstad, Odd Sture;
Børvik, Tore;
Berstad, Torodd;
Clausen, Arild Holm;
Benallal, Ahmed.
(2005)
A hypoelastic-viscoplastic constitutive model in LS-DYNA for dynamic strain aging – the McCormick model.
Institutt for konstruksjonsteknikk, NTNU
Rapport
-
Clausen, Arild Holm;
Auestad, Trond;
Langseth, Magnus.
(2005)
Strain rate and temperature tests on AA6005-T6 using a Split-Hopkinson Tension Bar.
Institutt for konstruksjonsteknikk, NTNU
Rapport
-
Børvik, Tore;
Clausen, Arild Holm;
Eriksson, Magnus;
Berstad, Torodd;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2005)
Experimental and numerical study on the perforation of AA6005-T6 panels.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Venkatapathi, Tarigopula;
Langseth, Magnus;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2005)
An experimental and numerical study of energy absorption in thin-walled high-strength steel sections.
WIT Press
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
2004
-
Clausen, Arild Holm;
Børvik, Tore;
Hopperstad, Odd Sture;
Benallal, Ahmed.
(2004)
Flow and fracture characteristics of aluminium alloy AA5083-H116 as function of strain rate, temperature and triaxiality.
Materials Science & Engineering: A
Vitenskapelig artikkel
-
Børvik, Tore;
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2004)
Perforation of AA5083-H116 aluminium plates with conical-nose steel projectiles-experimental study.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Clausen, Arild Holm.
(2004)
Strain rate tests on four polypropylenes.
Institutt for konstruksjonsteknikk, NTNU
Rapport
-
Langseth, Magnus;
Clausen, Arild Holm.
(2004)
Crashworthiness of Light-Weight Automotive Structures.
Institutt for konstruksjonsteknikk, NTNU
Vitenskapelig antologi/Konferanseserie
2003
-
Clausen, Arild Holm;
Dey, Sumita.
(2003)
Tensile Tests at High Strain�rates on Weldox Steels.
Institutt for konstruksjonsteknikk
Rapport
-
Auestad, Trond;
Clausen, Arild Holm;
Langseth, Magnus.
(2003)
Tensile Tests at High Strain�rates on Four Aluminium Alloys.
[Mangler utgivernavn]
Rapport
-
Clausen, Arild Holm;
Børvik, Tore;
Hopperstad, Odd Sture.
(2003)
Material tests and calibration of flow and fracture models for aluminium alloy AA5083.
[Mangler utgivernavn]
Rapport
-
Auestad, Trond;
Søvde, Morten;
Clausen, Arild Holm.
(2003)
High Strain�rate Tensile Tests on Aluminium Alloys 7046.70 and 6005.
Institutt for konstruksjonsteknikk
Rapport
-
Clausen, Arild Holm;
Børvik, Tore;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2003)
Impact resistance of AA6005 panels.
Journal de Physique IV : Colloque
Vitenskapelig artikkel
-
Benallal, Ahmed;
Børvik, Tore;
Clausen, Arild Holm;
Hopperstad, Odd Sture.
(2003)
Dynamic Strain Aging, Negative Strain-Rate Sensitivity and Related Instabilities.
Technische Mechanik
Vitenskapelig artikkel
-
Oppedal, Henning;
Clausen, Arild Holm.
(2003)
Material tests on aluminium alloy AA6005.
Institutt for konstruksjonsteknikk
Rapport
2002
-
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2002)
Stretch Bending of Aluminium Extrusions.
International Journal of Applied Mechanics and Engineering
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Auestad, Trond.
(2002)
Split-Hopkinson Tension Bar. Experimental Set-up and Theoretical Considerations. Draft.
Institutt for konstruksjonsteknikk, NTNU
Rapport
-
Clausen, Arild Holm.
(2002)
Forelesningsnotater i SIB 7025 Elementmetoden for rammer.
Institutt for konstruksjonsteknikk, NTNU
Kompendium
-
Clausen, Arild Holm;
Bell, Kolbein;
Mathisen, Kjell Magne;
Remseth, Svein N;
Søreide, Tore Helge.
(2002)
Kompendium i SIB 7025 Elementmetoden for rammer: Introduksjon til Galerkins metode, elementmetoden og forenklede beregningsmetoder for knekning.
Institutt for konstruksjonsteknikk, NTNU
Kompendium
2001
-
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2001)
Sensitivity of model parameters in stretch bending of aluminium extrusions.
International Journal of Mechanical Sciences
Vitenskapelig artikkel
-
Tryland, Tore;
Clausen, Arild Holm;
Remseth, Svein N.
(2001)
Effect of Material and Geometry Variations on Beam under Patch Loading.
Journal of Structural Engineering
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Tryland, Tore;
Remseth, Svein N.
(2001)
An investigation of material properties and geometrical dimensions of aluminium extrusions.
Materials & design
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2001)
Sensitivity of model parameters in stretch bending of aluminium extrusions.
International Journal of Mechanical Sciences
Vitenskapelig artikkel
-
Clausen, Arild Holm.
(2001)
Kalibrering av Johnson-Cooks materialmodell til stålkvaliteter i målplate og bøssing.
Institutt for konstruksjonsteknikk, NTNU
Rapport
-
Clausen, Arild Holm;
Auestad, Trond;
Jahre, Lars Olav;
Langseth, Magnus.
(2001)
Dynamic Energy Absorption Tests on Quadratic Hollow Steel Sections.
Institutt for konstruksjonsteknikk, NTNU
Rapport
-
Clausen, Arild Holm;
Dey, Sumita;
Hopperstad, Odd Sture;
Børvik, Tore.
(2001)
Uniaxial Tensile Tests on Weldox Steels at Different Strain Rates.
Institutt for konstruksjonsteknikk, NTNU
Rapport
2000
-
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2000)
Stretch bending of aluminium extrusions for car bumpers.
Journal of Materials Processing Technology
Vitenskapelig artikkel
1999
-
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(1999)
Stretch Bending of Aluminium Extrusions: Effect of Geometry and Alloy.
Journal of Engineering Mechanics
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(1999)
Stretch Bending of Aluminium Extrusions: Effect of Tensile Sequence.
Journal of Engineering Mechanics
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Tryland, Tore;
Remseth, Svein N.
(1999)
Statistical Investigation of Material Properties of Two Aluminium Alloys.
NTNU, Institutt for konstruksjonsteknikk
Rapport
-
Clausen, Arild Holm.
(1999)
Stretch Bending of Aluminium Extrusions.
Norges teknisk-naturvitenskapelige universitet
Norges teknisk-naturvitenskapelige universitet
Doktorgradsavhandling
1998
-
Clausen, Arild Holm.
(1998)
Stretch Bending of Aluminium Extrusions. Effect of Tensile Sequence.
R-3-98
Rapport
-
Clausen, Arild Holm;
Lademo, Odd-Geir;
Lemaitre, Jean.
(1998)
Modelling of Anisotropy in Aluminium Extrusions by Use of Initial Kinematic Hardening.
R-1-98
Rapport
1997
-
Larsen, Per Kristian;
Clausen, Arild Holm;
Aalberg, Arne.
(1997)
Stålkonstruksjoner : profiler og formler. 2. utg.
Tapir Akademisk Forlag
Tapir Akademisk Forlag
Fagbok
-
Clausen, Arild Holm;
Remseth, Svein N.
(1997)
Measurement of initial imperfection on aluminium extrusions.
NTNU. Inst. f. konstruksjonsteknikk
Rapport
-
Clausen, Arild Holm;
Remseth, Svein N.
(1997)
Control of aluminium extrusions' nominal dimensions.
NTNU. Inst. f. konstruksjonsteknikk
Rapport
-
Clausen, Arild Holm.
(1997)
Stretch bending of aluminium extrusions : effect of geometry and alloy.
NTNU. Inst. f. konstruksjonsteknikk
Rapport
1996
-
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(1996)
Stretch bending rig : experimental set-up.
Report (R-9-96)
Rapport
1994
-
Langseth, Magnus;
Clausen, Arild Holm.
(1994)
Støt og energiopptak : kompendium i faget "Inelastisk analyse og dimensjonering av konstruksjoner".
NTH. Inst. f. konstruksjonsteknikk
Kompendium
1993
-
Langseth, Magnus;
Clausen, Arild Holm.
(1993)
Dynamic and static axial crushing of thinwalled box members in alloy AA6082-T6 and T7 (water cooled) ; dynamic test data for alloy AA6082-T7 : comparison between dynamic and static tests for alloy AA6082-T7.
Report & 3
Fagbok
-
Langseth, Magnus;
Clausen, Arild Holm.
(1993)
Dynamic axial crushing of thinwalled aluminium box members : experimental set-up.
Report & 1
Fagbok
-
Langseth, Magnus;
Clausen, Arild Holm.
(1993)
Dynamic and static axial crushing of thinwalled box members in alloy AA6082-T6 and T7 (water cooled) : static test data.
Report & 2
Fagbok
-
Larsen, Per Kristian;
Clausen, Arild Holm;
Aalberg, Arne.
(1993)
Stålkonstruksjoner : profiler og formler.
Tapir Akademisk Forlag
Tapir Akademisk Forlag
Fagbok
Tidsskriftspublikasjoner
-
Aune, Sigurd;
Morin, David Didier;
Langseth, Magnus;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2024)
Modelling of welded aluminium connections in large-scale analyses.
Thin-walled structures
Vitenskapelig artikkel
-
Aune, Sigurd;
Morin, David Didier;
Langseth, Magnus;
Clausen, Arild Holm.
(2024)
Experimental and numerical study on the tensile ductility of an aluminium alloy with heat-affected zones.
European Journal of Mechanics. A, Solids
Vitenskapelig artikkel
-
Obkircher, Debora;
Costas, Miguel;
Langseth, Magnus;
Clausen, Arild Holm.
(2024)
Quasi-static and dynamic shear-out resistance in a steel fin-plate connection: An experimental and numerical investigation.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Sælen, Ruben Løland;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2023)
Mechanical behaviour and constitutive modelling of an additively manufactured stereolithography polymer.
Mechanics of materials (Print)
Vitenskapelig artikkel
-
Hund, Jonas;
Granum, Henrik Møgster;
Olufsen, Sindre Nordmark;
Holmström, Petter Henrik;
Johnsen, Joakim;
Clausen, Arild Holm.
(2022)
Impact of stress triaxiality, strain rate, and temperature on the mechanical response and morphology of PVDF.
Polymer testing
Vitenskapelig artikkel
-
Sønstabø, Johan Kolstø;
Faksvåg, Kristian Ullern;
Jakobsen, Lars;
Clausen, Arild Holm.
(2021)
Modelling of Stainless Steel AISI 316L in Finite Element Simulations.
ce/papers - Proceedings in Civil Engineering
Vitenskapelig artikkel
-
Holmström, Petter Henrik;
Clausen, Arild Holm;
Berstad, Torodd;
Morin, David;
Hopperstad, Odd Sture.
(2021)
A pragmatic orthotropic elasticity-based damage model with spatially distributed properties applied to short glass-fibre reinforced polymers.
International Journal of Solids and Structures
Vitenskapelig artikkel
-
Johannessen, Håkon;
Johannessen, Oddvar Hestetræet;
Costas, Miguel;
Clausen, Arild Holm;
Sønstabø, Johan Kolstø.
(2021)
Experimental and numerical study of notched SHS made of different S355 steels.
Journal of constructional steel research
Vitenskapelig artikkel
-
Olufsen, Sindre Nordmark;
Nygård, Per;
Ines Teixeira Pais, Catarina;
Perillo, Giovanni;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2021)
Influence of loading conditions on the tensile response of degraded polyamide 11.
Polymer
Vitenskapelig artikkel
-
Olufsen, Sindre Nordmark;
Clausen, Arild Holm;
Breiby, Dag Werner;
Hopperstad, Odd Sture.
(2020)
X-ray computed tomography investigation of dilation of mineral-filled PVC under monotonic loading.
Mechanics of materials (Print)
Vitenskapelig artikkel
-
Holmström, Petter Henrik;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2020)
Anisotropic tensile behaviour of short glass-fibre reinforced polyamide-6.
Composites Part C: Open Access
Vitenskapelig artikkel
-
Morton, Daniel Thor;
Reyes, Aase Gavina Roberg;
Clausen, Arild Holm;
Hopperstad, Odd Sture.
(2020)
Mechanical response of low density expanded polypropylene foams in compression and tension at different loading rates and temperatures.
Materials Today Communications
Vitenskapelig artikkel
-
Lund, Ådne;
Manoleas, Panagiotis;
Langseth, Magnus;
Clausen, Arild Holm.
(2020)
Sveiste knutepunkt mellom kaldformede hulprofiler.
Nyheter om stålbyggnad
Populærvitenskapelig artikkel
-
Olufsen, Sindre Nordmark;
Tekseth, Kim Robert Bjørk;
Breiby, Dag Werner;
Clausen, Arild Holm;
Hopperstad, Odd Sture.
(2020)
A technique for in situ X-ray computed tomography of deformation-induced cavitation in thermoplastics.
Polymer testing
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Hopperstad, Odd Sture.
(2019)
Volumetric strain measurement of polymeric materials subjected to uniaxial tension.
Strain
Vitenskapelig artikkel
-
Olufsen, Sindre Nordmark;
Clausen, Arild Holm;
Hopperstad, Odd Sture.
(2019)
Influence of stress triaxiality and strain rate on stress-strain behaviour and dilation of mineral-filled PVC.
Polymer testing
Vitenskapelig artikkel
-
Berntsen, John Fredrick;
Morin, David;
Clausen, Arild Holm;
Langseth, Magnus.
(2019)
Experimental investigation and numerical modelling of the mechanical response of a semi-structural polyurethane adhesive.
International Journal of Adhesion and Adhesives
Vitenskapelig artikkel
-
Andersen, Marius Endre;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2019)
Volumetric strain measurement of polymeric materials subjected to uniaxial tension.
Strain
Vitenskapelig artikkel
-
Johnsen, Joakim;
Clausen, Arild Holm;
Grytten, Frode;
Benallal, Ahmed;
Hopperstad, Odd Sture.
(2019)
A thermo-elasto-viscoplastic constitutive model for polymers.
Journal of the Mechanics and Physics of Solids
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Hopperstad, Odd Sture.
(2019)
Volumetric strain measurement of polymeric materials subjected to uniaxial tension.
Strain
Vitenskapelig artikkel
-
Grimsmo, Erik Løhre;
Aalberg, Arne;
Langseth, Magnus;
Clausen, Arild Holm.
(2017)
How placement of nut determines failure mode of bolt-and-nut assemblies.
Steel Construction
Vitenskapelig artikkel
-
Grimsmo, Erik Løhre;
Dæhli, Lars Edvard;
Hopperstad, Odd Sture;
Aalberg, Arne;
Langseth, Magnus;
Clausen, Arild Holm.
(2017)
Numerical study of fillet welds subjected to quasi-static and impact loading
.
International Journal of Mechanical Sciences
Vitenskapelig artikkel
-
Johnsen, Joakim;
Grytten, Frode;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2017)
Influence of strain rate and temperature on the mechanical behaviour of rubber-modified polypropylene and cross-linked polyethylene.
Mechanics of materials (Print)
Vitenskapelig artikkel
-
Ilseng, Arne;
Skallerud, Bjørn Helge;
Clausen, Arild Holm.
(2017)
Volume growth during uniaxial tension of particle-filled elastomers at various temperatures–Experiments and modelling.
Journal of the Mechanics and Physics of Solids
Vitenskapelig artikkel
-
Ilseng, Arne;
Skallerud, Bjørn Helge;
Clausen, Arild Holm.
(2017)
An experimental and numerical study on the volume change of particle-filled elastomers in various loading modes.
Mechanics of materials (Print)
Vitenskapelig artikkel
-
Børvik, Tore;
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus;
Reyes, Aase Gavina Roberg.
(2017)
Preface.
Procedia Engineering
Leder
-
Grimsmo, Erik Løhre;
Dæhli, Lars Edvard;
Hopperstad, Odd Sture;
Aalberg, Arne;
Langseth, Magnus;
Clausen, Arild Holm.
(2017)
Comparison of damage models in numerical simulations of fillet welds under quasi-static and impact loading.
Procedia Engineering
Vitenskapelig artikkel
-
Grimsmo, Erik Løhre;
Clausen, Arild Holm;
Aalberg, Arne;
Langseth, Magnus.
(2017)
Fillet welds subjected to impact loading – an experimental study.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Helbig, Martin;
Van Der Giessen, Erik;
Clausen, Arild Holm;
Seelig, Thomas.
(2016)
Continuum-micromechanical modeling of distributed crazing in rubber-toughened polymers.
European Journal of Mechanics. A, Solids
Vitenskapelig artikkel
-
Ilseng, Arne;
Skallerud, Bjørn Helge;
Clausen, Arild Holm.
(2016)
Tension behaviour of HNBR and FKM elastomers for a wide range of temperatures.
Polymer testing
Vitenskapelig artikkel
-
Grimsmo, Erik Løhre;
Clausen, Arild Holm;
Aalberg, Arne;
Langseth, Magnus.
(2016)
A numerical study of beam-to-column joints subjected to impact.
Engineering structures
Vitenskapelig artikkel
-
Johnsen, Joakim;
Grytten, Frode;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2016)
Experimental set-up for determination of the large-strain tensile behaviour of polymers at low temperatures.
Polymer testing
Vitenskapelig artikkel
-
Grimsmo, Erik Løhre;
Aalberg, Arne;
Langseth, Magnus;
Clausen, Arild Holm.
(2016)
Failure modes of bolt and nut assemblies under tensile loading.
Journal of constructional steel research
Vitenskapelig artikkel
-
Vilamosa, Vincent;
Clausen, Arild Holm;
Børvik, Tore;
Holmedal, Bjørn;
Hopperstad, Odd Sture.
(2016)
A physically-based constitutive model applied to AA6082 aluminium alloy at large strains, high strain rates and elevated temperatures.
Materials & design
Vitenskapelig artikkel
-
Vilamosa, Vincent;
Børvik, Tore;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2015)
Behaviour and modelling of aluminium alloy AA6060 subjected to a wide range of strain rates and temperatures.
The European Physical Journal Conferences
Vitenskapelig artikkel
-
Vilamosa, Vincent;
Clausen, Arild Holm;
Børvik, Tore;
Skjervold, SR;
Hopperstad, Odd Sture.
(2015)
Behaviour of Al-Mg-Si alloys at a wide range of temperatures and strain rates.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Grimsmo, Erik Løhre;
Clausen, Arild Holm;
Langseth, Magnus;
Aalberg, Arne.
(2015)
An experimental study of static and dynamic behaviour of bolted end-plate joints of steel.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Vilamosa, Vincent;
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Børvik, Tore;
Skjervold, Svein Roger.
(2014)
Influence of temperature and strain rate on the mechanical behaviour of aluminium alloy AA6060.
Materials Science Forum
Vitenskapelig artikkel
-
Ognedal, Anne Serine;
Clausen, Arild Holm;
Berstad, Torodd;
Seelig, Thomas;
Hopperstad, Odd Sture.
(2014)
Void nucleation and growth in mineral-filled PVC - An experimental and numerical study.
International Journal of Solids and Structures
Vitenskapelig artikkel
-
Ognedal, Anne Serine;
Clausen, Arild Holm;
Dahlen, Anfrid;
Hopperstad, Odd Sture.
(2014)
Behavior of PVC and HDPE under highly triaxial stress states: An experimental and numerical study.
Mechanics of materials (Print)
Vitenskapelig artikkel
-
Vilamosa, Vincent;
Clausen, Arild Holm;
Fagerholt, Egil;
Hopperstad, Odd Sture;
Børvik, Tore.
(2014)
Local measurement of stress-strain behaviour of ductile materials at elevated temperatures in a split-hopkinson tension bar system.
Strain
Vitenskapelig artikkel
-
Ognedal, Anne Serine;
Clausen, Arild Holm;
Polanco-Loria, Mario A.;
Benallal, Ahmed;
raka, bumedijen;
Hopperstad, Odd Sture.
(2012)
Experimental and numerical study on the behaviour of PVC and HDPE in biaxial tension.
Mechanics of materials (Print)
Vitenskapelig artikkel
-
Delhaye, Virgile Roger;
Clausen, Arild Holm;
Moussy, F;
Othman, R;
Hopperstad, Odd Sture.
(2011)
Influence of stress state and strain rate on the behaviour of a rubber-particle reinforced polypropylene.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Chen, Yan;
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2011)
Application of a split-Hopkinson tension bar in a mutual assessment of experimental tests and numerical predictions.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Børvik, Tore;
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2010)
SPECIAL ISSUE: IMPACT LOADING OF LIGHTWEIGHT STRUCTURES Preface.
International Journal of Impact Engineering
Leder
-
Delhaye, Virgile Roger;
Clausen, Arild Holm;
Moussy, F;
Hopperstad, Odd Sture;
Othman, R.
(2010)
Mechanical response and microstructure investigation of a mineral and rubber modified polypropylene.
Polymer testing
Vitenskapelig artikkel
-
Polanco-Loria, Mario A.;
Clausen, Arild Holm;
Berstad, Torodd;
Hopperstad, Odd Sture.
(2010)
Constitutive model for thermoplastics with structural applications.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Moura, Rafael Traldi;
Clausen, Arild Holm;
Fagerholt, Egil;
Alves, Marcilio;
Langseth, Magnus.
(2010)
Impact on HDPE and PVC plates - Experimental tests and numerical simulations.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Tarigopula, Venkatapathi;
Hopperstad, Odd Sture;
Langseth, Magnus;
Clausen, Arild Holm.
(2009)
An evaluation of a combined isotropic-kinematic hardening model for representation of complex strain-path changes in dual-phase steel.
European Journal of Mechanics. A, Solids
Vitenskapelig artikkel
-
Børvik, Tore;
Dey, Sumita;
Clausen, Arild Holm.
(2009)
Perforation resistance of five different high-strength steel plates subjected to small-arms projectiles.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Chen, Yan;
Pedersen, Ketill Olav;
Clausen, Arild Holm;
Hopperstad, Odd Sture.
(2009)
An experimental study on the dynamic fracture of extruded AA6xxx and AA7xxx aluminium alloys.
Materials Science & Engineering: A
Vitenskapelig artikkel
-
Chen, Yan;
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2009)
Stress-strain behaviour of aluminium alloys at a wide range of strain rates.
International Journal of Solids and Structures
Vitenskapelig artikkel
-
Tarigopula, Venkatapathi;
Hopperstad, Odd Sture;
Langseth, Magnus;
Clausen, Arild Holm.
(2008)
Elastic-plastic behaviour of dual-phase, high-strength steel under strain-path changes.
European Journal of Mechanics. A, Solids
Vitenskapelig artikkel
-
Tarigopula, Venkatapathi;
Hopperstad, Odd Sture;
Langseth, Magnus;
Clausen, Arild Holm;
Hild, Francois.
(2008)
A study of localisation in dual-phase high-strength steels under dynamic loading using digital image correlation and FE analysis.
International Journal of Solids and Structures
Vitenskapelig artikkel
-
Tarigopula, Venkatapathi;
Hopperstad, Odd Sture;
Langseth, Magnus;
Clausen, Arild Holm;
Hild, F;
Lademo, Odd-Geir.
(2008)
A study of large plastic deformations in dual phase steel using digital image correlation and FE analysis.
Experimental mechanics
Vitenskapelig artikkel
-
Tarigopula, Venkatapathi;
Langseth, Magnus;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2006)
Axial crushing of thin-walled high-strength steel sections.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Børvik, Tore;
Dey, Sumita;
Clausen, Arild Holm.
(2006)
A preliminary study on the perforation resistance of high-strength steel plates.
Journal de Physique IV : Colloque
Vitenskapelig artikkel
-
Venkatapathi, Tarigopula;
Langseth, Magnus;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2006)
Axial crushing of thin-walled high-strength steel sections.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Auestad, Trond;
Berstad, T;
Børvik, Tore;
Langseth, Magnus.
(2006)
High-temperature tests on aluminium in a split-Hopkinson bar - Experimental set-up and numerical predictions.
Journal de Physique IV : Colloque
Vitenskapelig artikkel
-
Benallal, Ahmed;
Berstad, Torodd;
Børvik, Tore;
Clausen, Arild Holm;
Hopperstad, Odd Sture.
(2006)
Dynamic strain aging and related instabilities: experimental, theoretical and numerical aspects.
European Journal of Mechanics. A, Solids
Vitenskapelig artikkel
-
Børvik, Tore;
Clausen, Arild Holm;
Eriksson, Magnus;
Berstad, Torodd;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2005)
Experimental and numerical study on the perforation of AA6005-T6 panels.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Børvik, Tore;
Hopperstad, Odd Sture;
Benallal, Ahmed.
(2004)
Flow and fracture characteristics of aluminium alloy AA5083-H116 as function of strain rate, temperature and triaxiality.
Materials Science & Engineering: A
Vitenskapelig artikkel
-
Børvik, Tore;
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2004)
Perforation of AA5083-H116 aluminium plates with conical-nose steel projectiles-experimental study.
International Journal of Impact Engineering
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Børvik, Tore;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2003)
Impact resistance of AA6005 panels.
Journal de Physique IV : Colloque
Vitenskapelig artikkel
-
Benallal, Ahmed;
Børvik, Tore;
Clausen, Arild Holm;
Hopperstad, Odd Sture.
(2003)
Dynamic Strain Aging, Negative Strain-Rate Sensitivity and Related Instabilities.
Technische Mechanik
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2002)
Stretch Bending of Aluminium Extrusions.
International Journal of Applied Mechanics and Engineering
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2001)
Sensitivity of model parameters in stretch bending of aluminium extrusions.
International Journal of Mechanical Sciences
Vitenskapelig artikkel
-
Tryland, Tore;
Clausen, Arild Holm;
Remseth, Svein N.
(2001)
Effect of Material and Geometry Variations on Beam under Patch Loading.
Journal of Structural Engineering
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Tryland, Tore;
Remseth, Svein N.
(2001)
An investigation of material properties and geometrical dimensions of aluminium extrusions.
Materials & design
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2001)
Sensitivity of model parameters in stretch bending of aluminium extrusions.
International Journal of Mechanical Sciences
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2000)
Stretch bending of aluminium extrusions for car bumpers.
Journal of Materials Processing Technology
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(1999)
Stretch Bending of Aluminium Extrusions: Effect of Geometry and Alloy.
Journal of Engineering Mechanics
Vitenskapelig artikkel
-
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(1999)
Stretch Bending of Aluminium Extrusions: Effect of Tensile Sequence.
Journal of Engineering Mechanics
Vitenskapelig artikkel
Bøker
-
Clausen, Arild Holm;
Langseth, Magnus.
(2008)
Impact Loading of Lightweight Structures.
Structural Impact Laboratory (SIMLab), Centre for Research-based Innovation, NTNU
Vitenskapelig antologi/Konferanseserie
-
Langseth, Magnus;
Clausen, Arild Holm.
(2004)
Crashworthiness of Light-Weight Automotive Structures.
Institutt for konstruksjonsteknikk, NTNU
Vitenskapelig antologi/Konferanseserie
-
Larsen, Per Kristian;
Clausen, Arild Holm;
Aalberg, Arne.
(1997)
Stålkonstruksjoner : profiler og formler. 2. utg.
Tapir Akademisk Forlag
Tapir Akademisk Forlag
Fagbok
-
Langseth, Magnus;
Clausen, Arild Holm.
(1993)
Dynamic and static axial crushing of thinwalled box members in alloy AA6082-T6 and T7 (water cooled) ; dynamic test data for alloy AA6082-T7 : comparison between dynamic and static tests for alloy AA6082-T7.
Report & 3
Fagbok
-
Langseth, Magnus;
Clausen, Arild Holm.
(1993)
Dynamic axial crushing of thinwalled aluminium box members : experimental set-up.
Report & 1
Fagbok
-
Langseth, Magnus;
Clausen, Arild Holm.
(1993)
Dynamic and static axial crushing of thinwalled box members in alloy AA6082-T6 and T7 (water cooled) : static test data.
Report & 2
Fagbok
-
Larsen, Per Kristian;
Clausen, Arild Holm;
Aalberg, Arne.
(1993)
Stålkonstruksjoner : profiler og formler.
Tapir Akademisk Forlag
Tapir Akademisk Forlag
Fagbok
Del av bok/rapport
-
Clausen, Arild Holm.
(2018)
Tensile Testing Using the Kolsky-Hopkinson Bar Machine.
Springer
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Grimsmo, Erik Løhre;
Clausen, Arild Holm;
Aalberg, Arne;
Langseth, Magnus.
(2015)
Beam-to-column joints subjected to impact loading.
Tampere University of Technology
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Vilamosa, Vincent;
Børvik, Tore;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2015)
Behaviour and modelling of aluminium alloy AA6060 subjected to a wide range of strain rates and temperatures.
EDP Sciences
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Ilseng, Arne;
Skallerud, Bjørn Helge;
Clausen, Arild Holm.
(2015)
Case study of elastomer seals using FEM.
International Center for Numerical Methods in Engineering (CIMNE)
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Ognedal, Anne Serine;
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Polanco-Loria, Mario;
Benallal, Ahmed;
raka, bumedijen.
(2010)
Experimental and numerical study on the behaviour of PVC and HDPE in biaxial tension.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Clausen, Arild Holm;
Hovden, Martin Thuve;
Polanco-Loria, Mario;
Berstad, Torodd;
Hopperstad, Odd Sture.
(2010)
Constitutive nodel for thermoplastics - calibration and validation.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Delhaye, Virgile Roger;
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Moussy, Francois;
Othman, Ramzi;
nesa, daniel.
(2010)
Behaviour and modelling of a rubber-modified polypropylene.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Polanco-Loria, Mario;
Clausen, Arild Holm;
Berstad, Torodd;
Hopperstad, Odd Sture.
(2009)
A Constitutive Model for Thermoplastics Intended for Structural Applications.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Tarigopula, Venkatapathi;
Hopperstad, Odd Sture;
Langseth, Magnus;
Clausen, Arild Holm.
(2009)
Behaviour and Modelling of Dual-Phase Steels.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Tarigopula, Venkatapathi;
Hopperstad, Odd Sture;
Clausen, Arild Holm;
Langseth, Magnus.
(2009)
Effect of pre-straining on localisation and fracture of dual-phase steel at elevated rates of strain.
EDP Sciences
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Moura, Rafael Traldi;
Clausen, Arild Holm;
Langseth, Magnus;
Alves, Marcilio.
(2009)
Dynamic mechanical behaviour of polyethylene.
EDP Sciences
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Tarigopula, Venkatapathi;
Albertini, Carlo;
Langseth, Magnus;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2009)
A hydro-pneumatic machine for intermediate strain-rates: Set-up, tests and numerical simulations.
EDP Sciences
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Clausen, Arild Holm;
Polanco-Loria, Mario A.;
Moura, Rafael Traldi;
Alves, Marcilio;
Berstad, Torodd;
Langseth, Magnus.
(2009)
Polymer plates subjected to impact: Experimental tests and numerical simulations.
EDP Sciences
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Chen, Yan;
Hopperstad, Odd Sture;
Clausen, Arild Holm;
Børvik, Tore;
Berstad, Torodd.
(2009)
Finite element analyses of Charpy tests on extruded aluminium alloys.
EDP Sciences
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Polanco-Loria, Mario;
Clausen, Arild Holm;
Berstad, Torodd;
Hopperstad, Odd Sture.
(2008)
A modified Boyce-Raghava model for constitutive modelling of thermoplastics.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Polanco-Loria, Mario;
Clausen, Arild Holm;
Berstad, Torodd;
Hopperstad, Odd Sture.
(2008)
A Constitutive Model for Thermoplastics in Structural Applications.
Annet
-
Tarigopula, Venkatapathi;
Langseth, Magnus;
Hopperstad, Odd Sture;
Clausen, Arild Holm;
Hild, Francois.
(2008)
Characterization of localization and large plastic deformations in dual-phase steel using digital image correlation.
Annet
-
Tarigopula, Venkatapathi;
Hopperstad, Odd Sture;
Langseth, Magnus;
Clausen, Arild Holm.
(2008)
Numerical Modelling of the Mechanical Behaviour of Dual-Phase Steels.
Annet
-
Chen, Yan;
Hopperstad, Odd Sture;
Lademo, Odd-Geir;
Clausen, Arild Holm;
Berstad, Torodd;
Langseth, Magnus.
(2007)
Preliminary simulations of the instrumented Charpy V-notch impact test.
Tapir Akademisk Forlag
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Tarigopula, Venkatapathi;
Hopperstad, Odd Sture;
Clausen, Arild Holm;
Langseth, Magnus.
(2007)
Effect of pre-straining on the dynamic mechanical behaviour of dual-phase high-strength steel alloys.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Chen, Yan;
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2007)
Behaviour of aluminium alloys under elevated rates of strain.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Berstad, Torodd;
Hopperstad, Odd Sture;
Clausen, Arild Holm;
Ilstad, Håvar;
Melve, Bjørn.
(2006)
Implementation of Constitutive Model for Thermoplastics with some Preliminary Results.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Venkatapathi, Tarigopula;
Langseth, Magnus;
Hopperstad, Odd Sture;
Clausen, Arild Holm.
(2005)
An experimental and numerical study of energy absorption in thin-walled high-strength steel sections.
WIT Press
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
Rapport
-
Holmstrøm, Petter Henrik;
Clausen, Arild Holm;
Hopperstad, Odd Sture.
(2019)
An experimental and numerical study of the mechanical behaviour of short glass-fibre reinforced thermoplastics.
Norwegian University of Science and Technology
Doktorgradsavhandling
-
Clausen, Arild Holm.
(2018)
Stålmaterialer - Kompendium i TKT4240 BM1 Bygningsmaterialer.
Institutt for konstruksjonsteknikk, NTNU
Kompendium
-
Johnsen, Joakim;
Clausen, Arild Holm;
Grytten, Frode;
Hopperstad, Odd Sture.
(2017)
Thermomechanical behaviour of semi-crystalline polymers: experiments, modelling and simulation.
Norges teknisk-naturvitenskapelige universitet
Norges teknisk-naturvitenskapelige universitet
Doktorgradsavhandling
-
Ilseng, Arne;
Skallerud, Bjørn Helge;
Clausen, Arild Holm.
(2016)
Mechanical behaviour of particle-filled elastomers at various temperatures - An experimental and numerical study.
NTNU
Doktorgradsavhandling
-
Hopperstad, Odd Sture;
Børvik, Tore;
Berstad, Torodd;
Clausen, Arild Holm;
Benallal, Ahmed.
(2005)
A hypoelastic-viscoplastic constitutive model in LS-DYNA for dynamic strain aging – the McCormick model.
Institutt for konstruksjonsteknikk, NTNU
Rapport
-
Clausen, Arild Holm;
Auestad, Trond;
Langseth, Magnus.
(2005)
Strain rate and temperature tests on AA6005-T6 using a Split-Hopkinson Tension Bar.
Institutt for konstruksjonsteknikk, NTNU
Rapport
-
Clausen, Arild Holm.
(2004)
Strain rate tests on four polypropylenes.
Institutt for konstruksjonsteknikk, NTNU
Rapport
-
Clausen, Arild Holm;
Dey, Sumita.
(2003)
Tensile Tests at High Strain�rates on Weldox Steels.
Institutt for konstruksjonsteknikk
Rapport
-
Auestad, Trond;
Clausen, Arild Holm;
Langseth, Magnus.
(2003)
Tensile Tests at High Strain�rates on Four Aluminium Alloys.
[Mangler utgivernavn]
Rapport
-
Clausen, Arild Holm;
Børvik, Tore;
Hopperstad, Odd Sture.
(2003)
Material tests and calibration of flow and fracture models for aluminium alloy AA5083.
[Mangler utgivernavn]
Rapport
-
Auestad, Trond;
Søvde, Morten;
Clausen, Arild Holm.
(2003)
High Strain�rate Tensile Tests on Aluminium Alloys 7046.70 and 6005.
Institutt for konstruksjonsteknikk
Rapport
-
Oppedal, Henning;
Clausen, Arild Holm.
(2003)
Material tests on aluminium alloy AA6005.
Institutt for konstruksjonsteknikk
Rapport
-
Clausen, Arild Holm;
Auestad, Trond.
(2002)
Split-Hopkinson Tension Bar. Experimental Set-up and Theoretical Considerations. Draft.
Institutt for konstruksjonsteknikk, NTNU
Rapport
-
Clausen, Arild Holm.
(2002)
Forelesningsnotater i SIB 7025 Elementmetoden for rammer.
Institutt for konstruksjonsteknikk, NTNU
Kompendium
-
Clausen, Arild Holm;
Bell, Kolbein;
Mathisen, Kjell Magne;
Remseth, Svein N;
Søreide, Tore Helge.
(2002)
Kompendium i SIB 7025 Elementmetoden for rammer: Introduksjon til Galerkins metode, elementmetoden og forenklede beregningsmetoder for knekning.
Institutt for konstruksjonsteknikk, NTNU
Kompendium
-
Clausen, Arild Holm.
(2001)
Kalibrering av Johnson-Cooks materialmodell til stålkvaliteter i målplate og bøssing.
Institutt for konstruksjonsteknikk, NTNU
Rapport
-
Clausen, Arild Holm;
Auestad, Trond;
Jahre, Lars Olav;
Langseth, Magnus.
(2001)
Dynamic Energy Absorption Tests on Quadratic Hollow Steel Sections.
Institutt for konstruksjonsteknikk, NTNU
Rapport
-
Clausen, Arild Holm;
Dey, Sumita;
Hopperstad, Odd Sture;
Børvik, Tore.
(2001)
Uniaxial Tensile Tests on Weldox Steels at Different Strain Rates.
Institutt for konstruksjonsteknikk, NTNU
Rapport
-
Clausen, Arild Holm;
Tryland, Tore;
Remseth, Svein N.
(1999)
Statistical Investigation of Material Properties of Two Aluminium Alloys.
NTNU, Institutt for konstruksjonsteknikk
Rapport
-
Clausen, Arild Holm.
(1999)
Stretch Bending of Aluminium Extrusions.
Norges teknisk-naturvitenskapelige universitet
Norges teknisk-naturvitenskapelige universitet
Doktorgradsavhandling
-
Clausen, Arild Holm.
(1998)
Stretch Bending of Aluminium Extrusions. Effect of Tensile Sequence.
R-3-98
Rapport
-
Clausen, Arild Holm;
Lademo, Odd-Geir;
Lemaitre, Jean.
(1998)
Modelling of Anisotropy in Aluminium Extrusions by Use of Initial Kinematic Hardening.
R-1-98
Rapport
-
Clausen, Arild Holm;
Remseth, Svein N.
(1997)
Measurement of initial imperfection on aluminium extrusions.
NTNU. Inst. f. konstruksjonsteknikk
Rapport
-
Clausen, Arild Holm;
Remseth, Svein N.
(1997)
Control of aluminium extrusions' nominal dimensions.
NTNU. Inst. f. konstruksjonsteknikk
Rapport
-
Clausen, Arild Holm.
(1997)
Stretch bending of aluminium extrusions : effect of geometry and alloy.
NTNU. Inst. f. konstruksjonsteknikk
Rapport
-
Clausen, Arild Holm;
Hopperstad, Odd Sture;
Langseth, Magnus.
(1996)
Stretch bending rig : experimental set-up.
Report (R-9-96)
Rapport
-
Langseth, Magnus;
Clausen, Arild Holm.
(1994)
Støt og energiopptak : kompendium i faget "Inelastisk analyse og dimensjonering av konstruksjoner".
NTH. Inst. f. konstruksjonsteknikk
Kompendium
PRODUKT
-
Clausen, Arild Holm.
(2009)
Behaviour and modelling of polymers. Workshop. Trondheim, Norway, 10-11 June 2009.
Digitale læremidler
Undervisning
Emner
- TKT4126 - Mekanikk
- TKT4116 - Mekanikk 1
- MEKA1101 - Mekanikk 1
- TKT4950 - Konstruksjonsteknikk, masteroppgave
- TKT4123 - Mekanikk 2
- TKT4550 - Konstruksjonsteknikk, fordypningsprosjekt
- TKT4132 - Mekanikk 3
- TKT4240 - BM1 Bygningsmaterialer
- TKT4170 - Stålkonstruksjoner 1
- VB6046 - Mekanikk 1
- MEKG1101 - Mekanikk 1
- MEKT1101 - Mekanikk 1
- MEKT1201 - Mekanikk 1
- BYGT2319 - Stålkonstruksjoner
- BYGT2318 - Statikk
- BYGT2900 - Bacheloroppgave bygg
- TKT4118 - Mekanikk 1
Formidling
2022
-
Vitenskapelig foredragSchwenke, Einar; Morin, David; Clausen, Arild Holm. (2022) Polymer testing with a pre-tensioned steel split-Hopkinson bar. NTNU 3rd International Conference on Impact Loading of Structures and Materials - ICILSM 2022 , Trondheim 2022-06-13 - 2022-06-17
-
Vitenskapelig foredragSælen, Ruben Løland; Hopperstad, Odd Sture; Clausen, Arild Holm. (2022) Material modelling and mechanical behaviour of an SLA additively manufactured polymer. Nordic Association of Computational Mechanics ECCOMAS Congress 2022 , Oslo 2022-06-05 - 2022-06-09
-
Vitenskapelig foredragHund, Jonas; Granum, Henrik Møgster; Johnsen, Joakim; Clausen, Arild Holm. (2022) On the interrelationship between stress triaxiality and material response in a semi-crystalline thermoplastic. University of Oxford 18th European Mechanics of Materials Conference , Oxford 2022-04-04 - 2022-04-06
2019
-
Faglig foredragSchwenke, Einar; Morin, David; Clausen, Arild Holm. (2019) Modelling of polypropylene subjected to impact loading at low temperatures. DYNA MORE 12th European LS-DYNA conference , Koblenz 2019-05-14 - 2019-05-16
-
Vitenskapelig foredragOlufsen, Sindre Nordmark; Clausen, Arild Holm; Hopperstad, Odd Sture. (2019) In-Situ X-ray tomography for investigation of void growth in mineral-filled PVC using a conventional X-ray source: A plausibility study. Nordic Polymer Days 2019 , Trondheim 2019-06-05 - 2019-06-07
-
Vitenskapelig foredragBerntsen, John Fredrick; Morin, David; Clausen, Arild Holm; Langseth, Magnus. (2019) Modelling of bonded component tests - Comparing MAT_240 to state-of-the-art model. DYNAmore GmbH 12th European LS-DYNA conference , Koblenz 2019-05-14 - 2019-05-16
2018
-
PosterBerntsen, John Fredrick; Morin, David; Clausen, Arild Holm; Langseth, Magnus. (2018) Mechanical behaviour of a ductile polyurethane adhesive. DYFP2018, the 17th International Conference on Deformation, Yield and Fracture of Polymers 2018-03-26 - 2018-03-29
-
PosterIlseng, Arne; Skallerud, Bjørn Helge; Clausen, Arild Holm. (2018) Volumetric behaviour of particle-filled elastomers. 17th International Conference on Deformation, Yield and Fracture of Polymers 2018-03-25 - 2018-03-29
-
Vitenskapelig foredragJohnsen, Joakim; Clausen, Arild Holm; Grytten, Frode; Benallal, Ahmed; Hopperstad, Odd Sture. (2018) Modelling of the thermo-mechanical behaviour of cross-linked low density polyethylene. 31st Nordic Seminar on Computational Mechanics (NSCM-31) , Umeå 2018-10-25 - 2018-10-26
-
Vitenskapelig foredragMorton, Daniel Thor; Reyes, Aase; Clausen, Arild Holm; Hopperstad, Odd Sture. (2018) Mechanical properties of expanded polypropylene foam at different temperatures. Deutsche Gesellschaft für Materialkunde e.V. / German Materi CellMat 2018 - 5th Cellular Materials , Bad Staffelstein 2018-10-24 - 2018-10-26
-
PosterJohnsen, Joakim; Clausen, Arild Holm; Grytten, Frode; Benallal, Ahmed; Hopperstad, Odd Sture. (2018) Influence of strain rate and temperature on the mechanical behaviour of cross-linked low density polyethylene. DYFP2018, The 17th International Conference on Deformation, Yield and Fracture of Polymers , Rolduc Abbey, Kerkrade 2018-03-26 - 2018-03-29
-
PosterMorton, Daniel Thor; Reyes, Aase; Clausen, Arild Holm; Hopperstad, Odd Sture. (2018) Experimental investigation of expanded polypropylene foam. DYFP2018, the 17th International Conference on Deformation, Yield and Fracture of Polymers 2018-03-26 - 2018-03-29
-
Faglig foredragClausen, Arild Holm. (2018) Konstruksjonssystemer. Trøndelag brann- og redningstjeneste Fagdag for innsatsledere i USAR (Urban search and rescue) , Hovedbrannstasjonen, Trondheim 2018-03-12 - 2018-03-12
2017
-
Vitenskapelig foredragJohnsen, Joakim; Grytten, Frode; Hopperstad, Odd Sture; Clausen, Arild Holm. (2017) Numerical simulation of cross-linked polyethylene at different ambient temperatures and strain rates. NTNU Mek'IT 17 - 9th National Conference on Computational Mechanics , Trondheim 2017-05-11 - 2017-05-12
2016
-
Vitenskapelig foredragJohnsen, Joakim; Grytten, Frode; Hopperstad, Odd Sture; Clausen, Arild Holm. (2016) Large strain tensile behaviour of rubber-modified polypropylene at low temperatures. European Mechanics of Materials Conference 15 , Brussel 2016-09-07 - 2016-09-09
-
Vitenskapelig foredragGrimsmo, Erik Løhre; Clausen, Arild Holm; Aalberg, Arne; Langseth, Magnus. (2016) Dynamic response of beam-to-column joints of steel. Politecnico di Torino 1st International Conference on Impact Loading of Structures and Materials , Torino 2016-05-22 - 2016-05-26
2015
-
PosterIlseng, Arne; Skallerud, Bjørn Helge; Clausen, Arild Holm. (2015) Experimental study of the compressibility of and HNBR and FKM elastomer. 16th International Conference on Deformation, Yield and Fracture of Polymers 2015-03-29 - 2015-04-02
-
Faglig foredragClausen, Arild Holm. (2015) Hvordan bidrar SFF, SFI og SFU til å gjøre utdanningen bedre? Erfaringer fra SFI – SIMLab ved NTNU. NOKUT NOKUT-konferansen om høyere utdanning , Bergen 2015-05-19 - 2015-05-20
-
PosterAndersen, Marius Endre; Clausen, Arild Holm; Hopperstad, Odd Sture. (2015) Large strain measurement of HDPE subjected to uniaxial loading using digital image correlation. 16th International Conference on Deformation, Yield and Fracture of Polymers 2015-03-29 - 2015-04-02
-
PosterHolmstrøm, Petter Henrik; Clausen, Arild Holm; Morin, David; Hopperstad, Odd Sture. (2015) An experimental and numerical investigation of tensile properties of glass fibre-reinforced polypropylene. 16th International Conference on Deformation, Yield and Fracture of Polymers 2015-03-29 - 2015-04-02
-
Vitenskapelig foredragIlseng, Arne; Skallerud, Bjørn Helge; Clausen, Arild Holm. (2015) Volumetric compression of HNBR and FKM elastomers. NTNU 8. National conf computational mechanics , Trondheim 2015-05-18 - 2015-05-19
2013
-
ProgramdeltagelseClausen, Arild Holm; Langseth, Magnus. (2013) NRK-innslag fra SIMLabs workshop med industripartnere. NRK NRK [TV] 2013-11-13
2011
-
PosterPolanco-Loria, Mario A.; Clausen, Arild Holm. (2011) A novel methodology applied to the identification of material parameters for thermoplastics. University of Valenciennes 3th International Conference on Impact Loading of Lightweight Structures , Valenciennes 2011-06-28 - 2011-07-01
2010
-
Vitenskapelig foredragClausen, Arild Holm; Hovden, Martin Thuve; Polanco-Loria, Mario A.; Berstad, Torodd; Hopperstad, Odd Sture. (2010) A Constitutive Model for Thermoplastics with some Applications. IMPLAST (International Symposium on Plasticity and Impact Mechanics 2010-10-12 - 2010-10-14
-
Vitenskapelig foredragClausen, Arild Holm; Hovden, Martin Thuve; Polanco-Loria, Mario A.; Berstad, Torodd; Hopperstad, Odd Sture. (2010) Constitutive model for thermoplastics - Calibration and validation. 19th DYMAT Technical Meeting , Strasburg 2010-12-01 - 2010-12-03
-
Vitenskapelig foredragDelhaye, Virgile Roger; Clausen, Arild Holm; Moussy, F; Othman, R.; Hopperstad, Odd Sture. (2010) Caractérisation et modélisation d'un polypropyléne appliqué au crash dans l'industrie automobile. MATERIAUX 2010 , NANTES 2010-10-18 - 2010-10-22
-
Vitenskapelig foredragDelhaye, Virgile Roger; Clausen, Arild Holm; Moussy, Francois; Othman, Ramzi; Hopperstad, Odd Sture. (2010) Behaviour and modelling of a polypropylene applied in automotive industry for crash applications. SFIP , Douai 2010-06-09 - 2010-06-10
-
Vitenskapelig foredragMoura, Rafael Traldi; Mazzariol, L. M.; Clausen, Arild Holm. (2010) An inverse modelling methodology for parameters identification of thermoplastic materials. 23rd Nordic Seminar on Computational Mechanics , Stockholm 2010-10-21 - 2010-10-22
-
Vitenskapelig foredragPolanco-Loria, M.; Clausen, Arild Holm. (2010) An inverse odelling methodology for parameters identification of thermoplastic materials. Nordic Seminar on Computational Mechanics , Stockholm 2010-10-21 - 2010-10-22
2009
-
Vitenskapelig foredragClausen, Arild Holm; Polanco-Loria, Mario; Moura, Rafael Traldi; Alves, Marcilio; Berstad, Torodd; Langseth, Magnus. (2009) Polymer plates subjected to impact: Experimental tests and numerical simulations. DYMAT 2009 , Brussel 2009-09-07 - 2009-09-11
-
Vitenskapelig foredragTarigopula, Venkatapathi; Hopperstad, Odd Sture; Langseth, Magnus; Clausen, Arild Holm. (2009) Behaviour and Modelling of Dual-Phase Steels. 7th European LS_DYNA Conference , Salzburg 2009-05-14 - 2009-05-15
-
Vitenskapelig foredragPolanco-Loria, Mario; Clausen, Arild Holm; Berstad, Torodd; Hopperstad, Odd Sture. (2009) A Constitutive Model for Thermoplastics Intended for Structural Applications. 7th European LS-DYNA Conference , Salzburg 2009-05-14 - 2009-05-15
-
Vitenskapelig foredragMoura, Rafael Traldi; Clausen, Arild Holm; Langseth, Magnus; Alves, Marcilio. (2009) Dispersion and inertia effects analysis on dynamic mechanical material characterization. COBEM 2009 , Gramado 2009-11-15 - 2009-11-20
-
Vitenskapelig foredragClausen, Arild Holm; Moura, Rafael Traldi; Alves, Marcilio; Langseth, Magnus; Polanco-Loria, Mario; Berstad, Torodd. (2009) Impact of PEHD plates: Experimental tests and numerical simulations. COBEM 2009 , Gramado 2009-11-15 - 2009-11-20
-
PosterMoura, Rafael Traldi; Clausen, Arild Holm; Langseth, Magnus; Alves, Marcilio. (2009) Dynamic mechanical behaviour of polyethylene. DYMAT 2009 , Brussel 2009-09-07 - 2009-09-11
-
PosterTarigopula, Venkatapathi; Hopperstad, Odd Sture; Clausen, Arild Holm; Langseth, Magnus. (2009) Effect of pre-straining on localisation and fracture of dual-phase steel at elevated rates of strain. DYMAT 2009 , Brussel 2009-09-07 - 2009-09-11
-
PosterChen, Yan; Hopperstad, Odd Sture; Clausen, Arild Holm; Børvik, Tore; Berstad, Torodd. (2009) Finite element analyses of Charpy tests on extruded aluminium alloys. DYMAT 2009 , Brussel 2009-09-07 - 2009-09-11
-
PosterTarigopula, Venkatapathi; Albertini, Carlo; Langseth, Magnus; Hopperstad, Odd Sture; Clausen, Arild Holm. (2009) A hydro-pneumatic machine for intermediate strain-rates: Set-up, tests and numerical simulations. DYMAT 2009 , Brussel 2009-09-07 - 2009-09-11
-
PosterPolanco-Loria, Mario; Clausen, Arild Holm; Berstad, Torodd; Hopperstad, Odd Sture. (2009) A constitutive model for thermoplastics in structural applications. DYFP 2009 , Rolduc, Kerkrade 2009-04-05 - 2009-04-09
-
PosterDelhaye, Virgile Roger; Polanco-Loria, Mario; Berstad, Torodd; Clausen, Arild Holm; Hopperstad, Odd Sture; Moussy, Francois. (2009) Characterization and numerical modelling of a polypropylene material applied in the automotive industry. DYFP 2009 , Rolduc, Kerkrade 2009-04-05 - 2009-04-09
2008
-
Vitenskapelig foredragPolanco-Loria, Mario; Clausen, Arild Holm; Berstad, Torodd; Hopperstad, Odd Sture. (2008) A Constitutive Model for Thermoplastics in Structural Applications. 21st Nordic Seminar on Computational Mechanics 2008-10-16 - 2008-10-17
-
Vitenskapelig foredragPolanco-Loria, Mario; Clausen, Arild Holm; Berstad, Torodd; Hopperstad, Odd Sture. (2008) A modified Boyce-Raghava model for constitutive modelling of thermoplastics. SIMLab, Centre of Research-based Innovation, NTNU International Conference on Impact Loading of Lightweight Structures , Trondheim 2008-06-17 - 2008-06-19
-
PosterTarigopula, Venkatapathi; Langseth, Magnus; Hopperstad, Odd Sture; Clausen, Arild Holm; Hild, Francois. (2008) Characterization of localization and large plastic deformations in dual-phase steel using digital image correlation. SIMLab, Department of Structural Engineering International Conference on Impact Loading of Lightweight Structures , Trondheim 2008-06-17 - 2008-06-19
-
PosterDelhaye, Virgile Roger; Clausen, Arild Holm; Hopperstad, Odd Sture; Moussy, F; Othman, R. (2008) Experimental characterization of the polypropylene P108MF97. Structural Impact Labratory, CRI International conference of impact loading of lightweight structures , Trondheim 2008-06-17 - 2008-06-19
-
PosterMoura, Rafael Traldi; Clausen, Arild Holm; Dumoulin, S.; Alves, Marcilio. (2008) Material tests on PEHD and PVC using DIC. SIMLab, Centre for Research-based Innovation, NTNU International Conference on Impact Loading of Lightweight Structures , Trondheim 2008-06-17 - 2008-06-19
-
Populærvitenskapelig foredragTarigopula, Venkatapathi; Hopperstad, Odd Sture; Langseth, Magnus; Clausen, Arild Holm. (2008) Numerical Modelling of the Mechanical Behaviour of Dual-Phase Steels. NTNU Nordic Seminar on Computational Mechanics (NSCM-21) , Trondheim 2008-10-16 - 2008-10-17
-
Populærvitenskapelig foredragTarigopula, Venkatapathi; Langseth, Magnus; Hopperstad, Odd Sture; Clausen, Arild Holm; Hild, Francois. (2008) Characterization of localization and large plastic deformations in dual-phase steel using digital image correlation. SIMLab, Department of Structural Engineering International Conference on Impact Loading of Lightweight Structures , Trondheim 2008-06-17 - 2008-06-19
-
Populærvitenskapelig foredragTarigopula, Venkatapathi; Langseth, Magnus; Clausen, Arild Holm; Hopperstad, Odd Sture. (2008) Behaviour of dual-phase steel at elevated rates of strain. ECCS European Convention for Constructional Steelwork 5th European Conference on Steel and Composite Structures , Graz 2008-09-03 - 2008-09-05
2007
-
Vitenskapelig foredragTarigopula, Venkatapathi; Hopperstad, Odd Sture; Clausen, Arild Holm; Langseth, Magnus. (2007) Effect of pre-straining on the dynamic mechanical behaviour of dual-phase high-strength steel alloys. Prof. O. T. Bruhns and Prof. A. Meyers, Ruhr University IMPLAST 2007 , Bochum 2007-08-21 - 2007-08-24
-
Vitenskapelig foredragClausen, Arild Holm; Hopperstad, Odd Sture; Berstad, Torodd; Ilstad, Håvar; Melve, Bjørn. (2007) Modelling of thermoplastics: State-of-the-art and challenges. NAFEMS Materials Modeling - FEA Simulations of the Behaviour of Modern Industrial Materials Including their Failure 2007-03-20 - 2007-03-21
2006
-
Vitenskapelig foredragClausen, Arild Holm. (2006) Modelling of polymers. SIMLab, Institutt for konstruksjonsteknikk SIMLab Workshop 2006 , Trondheim 2006-06-14 - 2006-06-15
2005
-
Vitenskapelig foredragTarigopula, Venkatapathi; Langseth, Magnus; Hopperstad, Odd Sture; Clausen, Arild Holm. (2005) An experimental and numerical study of energy absorption in thin-walled high-strength steel sections. University of Sao Paolo International Conference on Impact Loading of Lightweight Structures , Florianopolis 2005-05-08 - 2005-05-12
2004
-
Vitenskapelig foredragBørvik, Tore; Clausen, Arild Holm; Eriksson, Magnus. (2004) Experimental and numerical study on AA6005 panels. University of Cambridge 5th International Symposium on Impact Engineering , Cambridge 2004-07-11 - 2004-07-15
-
Vitenskapelig foredragBenallal, Ahmed; Børvik, Tore; Clausen, Arild Holm; Hopperstad, Odd Sture. (2004) Negative strain-rate sensitivity and its consequences on instability and rupture of aluminium alloys. International Symposium of Light-Weight Automotive Structures 2004-06-17 - 2004-06-18
-
PosterChen, Yan; Langseth, Magnus; Hopperstad, Odd Sture; Clausen, Arild Holm. (2004) Modelling of Dynamic Material Behaviour of Aluminium Alloys for Structural Applications. International Symposium of Light-Weight Automotive Structures 2004-06-17 - 2004-06-18
-
PosterClausen, Arild Holm; Auestad, Trond; Børvik, Tore; Hopperstad, Odd Sture; Langseth, Magnus. (2004) Strain rate sensitivity of three aluminium alloys. Crashworthiness of Light-Weight Automotive Structures 2004-06-17 - 2004-06-18
-
PosterBørvik, Tore; Clausen, Arild Holm; Eriksson, Magnus. (2004) Characterization of AA6005-T6 under dynamic loading. International Symposium on Crashworthiness of Light-Weight Automotive Structures 2004-06-17 - 2004-06-18
-
PosterTarigopula, Venkatapathi; Langseth, Magnus; Clausen, Arild Holm; Hopperstad, Odd Sture. (2004) Axial Crushing of High-Strength Steel Automotive Components. International Symposium of Light-Weight Automotive Structures 2004-06-17 - 2004-06-18
2003
-
Vitenskapelig foredragClausen, Arild Holm; Oppedal, Henning; Berstad, Torodd. (2003) FEM Simulations of a Split-Hopkinson Tension Bar. 16th Nordic Seminar on Computational Mechanics , Trondheim, Norge 2003-10-18 -
-
Vitenskapelig foredragBenallal, Ahmed; Berstad, Torodd; Børvik, Tore; Clausen, Arild Holm; Hopperstad, Odd Sture. (2003) On the Effect of Negative Strain-Rate Sensitivity on the Behaviour of Aluminium Alloy 5083-H116. 5th Euromech Solid Mechanics Conference , Thessaloniki, Hellas 2003-08-22 -
-
Vitenskapelig foredragClausen, Arild Holm; Børvik, Tore; Hopperstad, Odd Sture; Langseth, Magnus. (2003) Impact resistance of AA6005 panels. 7th International DYMAT Conference , Porto, Portugal 2003-09-12 -
2002
-
Vitenskapelig foredragDey, Sumita; Hopperstad, Odd Sture; Børvik, Tore; Clausen, Arild Holm. (2002) A constitutive relation and failure criterion for three structural steels at high strain rates. 7th International Symposium on Structures under Shock and Impact , Montreal 2002-05-29 -
2001
-
Vitenskapelig foredragClausen, Arild Holm; Hopperstad, Odd Sture; Langseth, Magnus. (2001) Stretch bending of aluminium extrusions. First national conference on Computational Mechanics , Trondheim 2001-05-04 -
-
Vitenskapelig foredragClausen, Arild Holm; Larsen, Per Kristian; Selberg, Knut. (2001) Teaching Aesthetics in Structural Design courses. International Conference on Engineering Education , Oslo, Norway 2001-08-10 -
-
Vitenskapelig foredragClausen, Arild Holm; Hopperstad, Odd Sture; Lademo, Odd-Geir; Langseth, Magnus. (2001) Explicit FEA of Stretch Bending of Aluminium Bumpers. Materials Week 2001 , München, Tyskland 2001-10-02 -
-
Vitenskapelig foredragClausen, Arild Holm; Lademo, Odd-Geir; Hopperstad, Odd Sture; Langseth, Magnus. (2001) Explicit FEA of Stretch Bending of Aluminium Bumpers. Materials Week 2001 , Munchen 2001-10-04 -
1998
-
Vitenskapelig foredragClausen, Arild Holm; Hopperstad, Odd Sture; Langseth, Magnus. (1998) Stretch Bending of Rectangular Hollow Section Aluminium Extrusions. ASCE 12th Engineering Mechanics Conference , La Jolla, CA, USA
1997
-
Populærvitenskapelig foredragClausen, Arild Holm. (1997) Aluminium i lastbærende konstruksjoner (Foredrag i Hydroaluminium Maritimes møte med tre linjeforeninger ved NTNU). , Gløshaugen
-
Vitenskapelig foredragClausen, Arild Holm; Hopperstad, Odd Sture; Langseth, Magnus. (1997) Stretch bending analyses using implicit and explicit FE codes. 10th Nordic Seminar on Computational Mechanics , Tallin
1994
-
Vitenskapelig foredragLangseth, Magnus; Berstad, Torodd; Hopperstad, Odd Sture; Clausen, Arild Holm. (1994) Energy absorption in axially loaded square thin-walled aluminium extrusions. 3rd International Conference on Structures Under Shock and Impact , [Mangler data]